Bedienungsanleitung Telekom Sinus 1054 data (Seite 5 von 10) (Englisch)

680858

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

14.01.2005 KA_GB_1054_data.fm

method which can be applied regardless of the operating system being used.

–

WPA-PSK:

(Wi-Fi Protected Access Pre-Shared Key = privacy comparable to that of a wired system, but

greater than WEP) using a varying encryption key, but a shared starting key) A method similar to WPA.

The change arises from a code mix from the client-related, static pre-shared key.

–

WPA with Tiny Server:

Here a server in the local network takes over the task of authentication between

the communicating devices. In addition to a password, the computer must identify itself by means of a

user name. You can obtain this name from your network administrator who has already stored it on the

Tiny Server.

–

WPA2 with RADIUS Server:

In this case an external server takes over the task of authentication

between the communicating devices in your network.

As a client in a network which has been protected in one of these ways, you personally have no

influence upon the method being used. You must comply with the specifications you have be-

en given and make the corresponding settings.

The encryption method and the corresponding encryption key must be the same for all com-

puters within the network in order that the PCs can communicate with one another.

When the stick leaves the works the encryption is set to AUS (OFF) and accordingly none of the input fields

are active. For this reason you will not - as a rule - be able to access an existing network which has already

been configured. The T-COM WLAN Manager icon in the Quick Launch bar is red if there is no connection.

If WEP is employed in the WLAN:

You cannot enter any key you like in any way you like.

Which key you use and with which code number

depends upon how it was generated on the access point/router.

For security reasons there are no rules determining how a key is calculated

(different algo-

rithms are used to calculate the code). When allocating the code via Schlüsselwort (key string),

check whether the access point into the WLAN is a

Sinus 154 DSL

T-Sinus 1054 DSL

. If this

is not the case, you must use the hexadecimal key with the corresponding code number which

was generated from the key string for these computers.

Click the opening arrow

next to Ver-

schlüsselung (Encryption) and select

WEP

in the menu.

Click the opening arrow

next to Ver-

schlüsselung and select either

64 bit

128 bit

as your key security level.

To enter the key you have the follo-

wing possibilities:

If the access point/router is a product

of the T-Sinus or Sinus series (130,

154, 1054, 530, 730) and the key

was generated by means of a key

string, you can click the box in front

of Schlüsselwort (key string): This ac-

tivates the input field allowing you to

enter the string of letters which were

used on the access point/router.

Then you only have to specify the correct code number in the bottom field (Standardschlüssel).

If the access point/router does not belong to one of the above-named series, click the opening arrow

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Telekom Sinus 1054 data Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Telekom Sinus 1054 data

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info