Bedienungsanleitung Telekom Speedport W 100 Stick (Seite 13 von 26) (Deutsch)

680417

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

08.12.2006 KA_GB_154_stick.fm

The "Allgemein" (General) tab

Setting up/selecting a profile

If you intend to operate your computer with the Speed-

port W 100 Stick in more than one network (alternately),

you can set up appropriate profiles. A profile is a com-

bination of settings which are united under a particular

name - the profile name.

Example: The computer is to be used either in the mar-

keting network, which is, for example, an ad hoc net-

work and in the development network, which is, for ex-

ample, an infrastructure network. The networks are of

varying kinds (ad hoc and infrastructure) and, in additi-

on, the encryption code is not the same.

1 Enter the name you want to give to the profile, e.g.

Speedport W 500V

, into the entry field beside

Pro-

fil

. If there is already a name of a saved profile in

this field, double-click this name in order to high-

light it and then enter the name for the new profile.

2 Click the Speichern (Save) button.

If you click the Speichern button after you have made all the other possible settings, these settings will all

be assigned to the profile name displayed on this card.

If you click the Löschen (Delete) button, the displayed profile will be deleted.

Selecting a profile:

1 Click the opening arrow beside the

Profil

entry field.

2 Highlight the name of the profile you would like to use.

3 Click Übernehmen (Apply).

The settings which belong to this profile will then become valid.

SSID

All computers in the domain of a WLAN (wireless local network, radio network) must have the same identity

in order to be recognized by the other computers. It only makes sense to use the SSID of a network which

is within your range.

1 (Only if you use more than one profile) Select the profile you would like to assign an SSID to.

2 Click the opening arrow to the right of the SSID entry field.

3 You will then be shown the SSID of all networks which are within range of your computer. Select the

SSID you require.

If the SSID of the radio network is not displayed although you are sure that you are within its range,

this usually means that the access point/router is not transmitting its SSID. In this event, you must en-

ter the SSID manually.

4 Click the Speichern (Save) button beside the Profil entry field.

Note: If you have not selected a profile, the selected SSID will be assigned to the current profile. At the time

of the initial configuration this will be the default setting (WLAN).

Note: If you would like to access another network with your computer and it is within your radio range, you

can select this network via the Netzübersicht (Network overview) tab. Then you only have to select

the corresponding profile which you set up at an earlier time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Telekom Speedport W 100 Stick Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Telekom Speedport W 100 Stick

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info