Bedienungsanleitung Teles 2TR Box (Seite 30 von 41) (Englisch)

7253

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

1 Function Command

sequence

Example Explanation 2 3 4

X Call numbers for the TR

ports

*01*PIN*number# *01*01234*335561# Sets the call numbers for the TR ports. If a number is not con-

figured, the port will answer all incoming calls. The call number

is now set to 335561.

number

Access number for Per-

sonal CallBack

*02*PIN*number# *02*01234*335562# Sets the access number for the Personal CallBack Server and

for remote administration. The access is now set to 335562.

number

Call forwarding setting

*06*PIN*source no.*

destination no.#

*06*01234*335561*

030 223360#

Forwards a call from the source number to the destination

number. If no destination number is entered, call forwarding is

disabled. The source number must be the number of a device

attached to the TELES.iTA/2TR Box.

Off X X

X Call forwarding to des-

tination number

*07*destination no.# *07*0302233# Forwards calls from the current number to the destination num-

ber. Instead of entering an external number, you can enter the

alternate TR port number. Calls are now forwarded to 030 2233

number

X Call forwarding off/on

*08*0|1# *08*0# Deactivates or activates call forwarding which was set by the

command sequences 06 and 07. In the example, call forward-

ing is deactivated.

Off X

X Changing gain of TR

port signals

*09*1|2# *09*3# Changes the TR port signal gain. The higher the digit, the

louder the volume. The port is now set to the loudest setting.

Setting CB codes and

CallBack numbers

*81|82|83|84|85* PIN

[*CB code*number]#

*81*01234*98765*0

30 223360#

Sets the CB code and the CallBack number. You can set up to

5 codes. In the example, the CB code is set to 98765 and the

CallBack number 030/223360.

numbers

Changing CallBack

numbers

*87*CB code*new

no.#

*87*98765*030

223361#

Changes the CallBack number assigned to a particular CB

code. The number is changed to new no. In the example, the

new CallBack no. 030/22 33 61 is assigned to the CB code

98765.

Empty X X

Deleting CallBack no.

*89*PIN*PIN# *89*01234*01234# Deletes all CallBack numbers and CB codes X X

Changing your PIN

*90*oldPIN*newPIN

*newPIN #

*90*00000*0123*01

234#

In the example, your PIN is being change from 00000 to 01234. 00000 X X

Device ID (1 - 8)

*92*PIN*digit# *92*01234*2# If you want to operate several TELES.iTA/2TR Boxes on a sin-

gle ISDN line, you must assign each box a unique device ID. In

the example, the device ID is set to the ID 2.

Callback

*99*CB code# 335562*99*98765# Calls CallBack number assigned to CB code. The caller is

granted a line. In the example, when the caller enters the CB

code, he will be called back at the number: 030 223361.

No de-

fault

possible

Disconnect

## The TELES.iTA/2TR Box emulates a telephone's disconnect

key. The line is disconnected without having to hang up.

Disconnect for Personal

CallBack

After you call Personal CallBack, you terminate the connection

using this command. You can then make another call then.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Teles 2TR Box Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info