Bedienungsanleitung Telstra 6100A (Seite 9 von 15) (Englisch)

628341

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

Telstra network services

Flashing Message Indicator

If you subscribe to Telstra Home Messages 101 or MessageBank your Telstra 6100/6100a will indicate

when you have received a new voice message.

If you have purchased a Telstra 6100, the icon on the display and the power/in use light will flash

when you receive a message.

If you have purchased a Telstra 6100a, the icon on the display will flash when you receive a

message.

Call 13 2200 to request activation of flashing Message Indicator on your telephone service

Using Call Waiting

Call Waiting tells you if a new caller is trying to contact you when you are already on the phone. A

discreet tone alerts you to the new caller, so you can answer your second incoming call by putting the

first caller on hold.

To answer an incoming call whilst you are on the phone

1. Press the button. Your first caller is put on hold and you can talk to your second caller.

2. To revert back to the original caller, press the button again.

NOTE: if you have subscribed to Telstra Calling Number Display

, the second caller’s number will appear on

the handset display.

3-way chat

If you are already on a call, you can add another person and have a 3-way chat.

To put an existing call on hold and make a new call

1. Press , wait for the dial tone, dial the phone number and wait for an answer

2. When the third party answers your call, press the button

Using the answering machine (6100a only)

Your Telstra 6100a can digitally record up to 10 minutes of messages. Each message can be up to a

maximum of 2 minutes

Your Telstra 6100a comes with two pre-recorded outgoing messages, one for Answer and Record mode

and one for Answer Only mode. You can also record your own outgoing message.

Your Telstra 6100a gives clear voice prompts to help you when using the answering machine.

If you have not already set the day you will need to do this so that you will know when each

message was received, see page 18

Message playback

To begin operating your answering machine, press the button. The machine announces,

“You have (n) new messages”. All new messages will automatically be played to the handset.

The following functions are available under each numerical key:

To listen to the main menu

Play all messages

Play new messages

To skip back during message playback

To delete messages

To skip forward during message playback

Set answer On or Off

Hear the outgoing message menu

To set the security code

To set the day

To set the answering delay

To record a memo

Switching the answering machine on/off

When first connected to the mains, your Telstra 6100a is set to ON and Answer and Record.

To turn the answering machine On/Off press the button followed by the button.

The icon will appear on the display when the answering machine is turned on and will start

flashing if new messages have been received. If the answering machine is switched off, the icon

will not appear on the display.

The icon will flash rapidly if the internal memory is full and no new messages can be recorded.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Telstra 6100A Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info