Bedienungsanleitung Tenda i12 (Seite 53 von 84) (Englisch)

742873

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Parameter

Description

RTS Threshold

It specifies the frame length threshold for triggering the RTS/CTS mechanism.

If a frame exceeds this threshold, the RTS/CTS mechanism is triggered to reduce conflicts.

The value range is 1 to 2347. The unit is byte.

Set the RTS threshold based on the actual situation. An excessively small value increases the

RTS frame transmission frequency and bandwidth requirement. A higher RTS frame

transmission frequency enables a wireless network to recover from conflicts quicker. For a

wireless network with high user density, you can reduce this threshold for reducing

conflicts.

The RTS mechanism requires some network bandwidth. Therefore, it is triggered only when

frames exceed this threshold.

DTIM Interval

It is short for Delivery Traffic Indication Message, and specifies the countdown before the

AP transmits broadcast and multicast frames in its cache. The value range is 1 to 255. The

unit is Beacon interval.

For example, if DTIM Interval is set to 1, the AP transmits all cached frames at the Beacon

interval.

Receive Signal

Strength

It specifies the minimum strength of received signals acceptable to the AP.

If the strength of the signals transmitted by a wireless device is weaker than this threshold,

the wireless device cannot connect to the AP. An appropriate value of this parameter

ensures that wireless clients connect to APs with strong signals.

Output Power

It specifies the transmit power of the AP. The unit is dBm. The value range is 8 dBm to 23

dBm.

A greater transmit power of the AP offers broader network coverage. You can slightly

reduce the transmit power to improve the wireless network performance and security.

Power Lockout

It specifies whether the current transmit power settings of the AP can be changed.

Preamble

It specifies the time when data is transmitted between a wireless client and the AP. The

time is notified to other wireless clients to prevent conflicts. During transmission, the

preamble as well as the synchronization signal and frame interval is transmitted before

working data.

In data frames for wireless transmission, a long preamble results in short working data.

Therefore, a short preamble can be used to improve wireless transmission efficiency.

It is optional for 802.11b devices to support short preambles. It is mandatory for 802.11g

devices to support short preambles.

Signal

Transmission

It specifies the signal transmission mode for a specific scenario.



Coverage-oriented: This mode enables the AP to provide broader coverage when the AP

is deployed in an area with low AP density, such as an office, a warehouse, or a hospital.



Capacity-oriented: This mode reduces inter-AP interference when the AP is deployed in

an area with high AP density, such as a venue, an exhibition hall, a banquet hall, a

stadium, a college classroom, or a departure lounge.

Signal

Reception

It specifies the signal reception mode for a specific scenario.



Coverage-oriented: This mode enables more wireless devices to connect to the AP in an

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tenda i12 Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info