Bedienungsanleitung Tenda i24 (Seite 64 von 118) (Englisch)

742874

Zoom out

Zoom in

Vorherige Seite

1/118

Nächste Seite

Parameter

Description

Fragment Threshold

It specifies the threshold of a fragment. Unit: byte.

Fragmenting is a process that divides a frame into several fragments, which are

transmitted and acknowledged separately. If the size of a frame exceeds this threshold,

the frame is fragmented.

In an environment of high error rate, you can reduce the threshold to enable the AP to

resend only the fragments that have not been sent successfully, so as to increase the

frame throughput.

In an environment without interference, you can increase the threshold to reduce the

number of acknowledgement times, so as to increase the frame throughput.

RTS Threshold

It specifies the frame length threshold for triggering the RTS/CTS mechanism. Unit:

byte.

If a frame exceeds this threshold, the RTS/CTS mechanism is triggered to reduce

conflicts.

Set the RTS threshold based on the actual situation. An excessively small value

increases the RTS frame transmission frequency and bandwidth requirement. A higher

RTS frame transmission frequency enables a WiFi network to recover from conflicts

quicker. For a WiFi network with high user density, you can reduce this threshold for

reducing conflicts. The RTS mechanism requires some network bandwidth. Therefore, it

is triggered only when frames exceed this threshold.

Signal Transmission

 Coverage-oriented: This mode broadens WiFi coverage of APs, and is usually used

in scenarios deployed with fewer APs, such as offices, warehouses, and hospitals.

 Capacity-oriented: This mode effectively decreases mutual interference among

APs, and is usually used in scenarios deployed with massive APs, such as

conferences, exhibition halls, banquet halls, stadiums, classrooms of

higher-education institutes, airports and so on.

DTIM Interval

It specifies the interval for transmitting the Delivery Traffic Indication Message (DTIM)

frame. Unit: Beacon.

A countdown starts from this value. The AP transmits broadcast and multicast frames

in its cache only when the countdown reaches zero.

For example, if DTIM Interval is set to 1, the AP transmits all cached frames after each

beacon frame is transmitted.

RSSI Threshold

Set a minimum strength of received signals acceptable to the AP. If the strength of the

signals transmitted by a wireless device is weaker than this threshold, the wireless

device cannot connect to the AP.

If there are multiple APs, an appropriate RSSI Threshold ensures that wireless devices

can connect to the AP’ WiFi networks with strong signals.

Prioritize 5 GHz

If enabled, devices that support 5 GHz band choose to connect the AP’s 5 GHz WiFi

network first. Otherwise, they randomly connect to 2.4GHz or 5 GHz WiFi network. This

option is available on the 5 GHz configuration page.

The default RSSI threshold to enable this function is -80 dBm. You can adjust the

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tenda i24 Seite 64

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info