Bedienungsanleitung Tenda Nova MW3 (Seite 1 von 2) (Englisch)

730192

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Know your device

Package contents

Connect the primary node

1. Power off your modem, and remove and reinstall its

battery (if any).

2. Use the included Ethernet cable to connect a LAN port

of your modem or the Ethernet jack to the WAN/LAN port

of any node. This node is your primary node.

3. Power on your modem.

4. Use one of the included power adapters to connect the

primary node to a power source, the LED indicator lights

solid on. Wait about for 40 seconds. The system completes

startup when the LED indicator blinks green.

*The first node you set up functions as the primary node,

while the rest are referred to as the secondary node.

Ⅱ

Connect the primary node to

the internet

1. Go to the WiFi network list on your mobile device,

select the SSID of the primary node, and enter its

password. The SSID and password are specified

on the bottom label of any node.

1. Place each node:

- At a high and open area within the network coverage

of connected node;

- Keep your nodes away from electronics with strong

interference, such as microwave oven, induction

cooker and refrigerator.

2. Run the Tenda WiFi App and follow the onscreen

instructions to connect the primary node to the

internet.

After the primary node is connected to the internet,

its LED indicator lights solid green.

Ⅲ

Connect secondary nodes to

the internet

Ⅳ

Install the Tenda WiFi App

Ⅰ

Download the Tenda WiFi App on your mobile device by

searching for Tenda WiFi in App Store or Google Play or by

scanning the QR code. Then, install the App.

Available for iOS and Android

DSL

WAN

RST PWRLANWAN/LAN

Ethernet jack

Internet

Modem

NOVA_XXXX

XXXXXX

Wi-Fi

CHOOSE A NETWORK...

Settings

Wi-Fi

2. Use the other included power adapters to connect the

remaining secondary nodes to power sources, their LED

indicators light solid green. Wait about for 40 seconds.

The secondary node is connecting to another node when

its LED indicator blinks green.

3. Observe the LED indicator of the secondary nodes until

their LED indicators light one of the following colors:

4. If a node's LED indicator does not light solid green, move your

nodes according to step 1 in get it better connected.

Solid green Good connection

Solid yellow Fair connection

Solid red Disconnected

RST PWRLANWAN/LAN

DC power jack

WAN/LAN port

LAN port

RST button

Mesh3f x 3 Ethernet cable x 1

Power adapter x 3 Quick installation guide x 1

Done. To access the internet:

- Wired devices: Connect wired devices to the LAN ports of your

nodes.

- Wireless devices: Connect wireless devices to your WiFi

network using the SSID and WiFi password you set.

- If you want to manage the network anytime anywhere, tap

and use your account to login.

WAN/LAN

TendaWiFi

AC1200 Whole Home Mesh WiFi System

Model: Mesh3f

Power: 9V 1A

FCC ID: V 7TMESH3F

IC: 9034A-MESH3F

MAC:

SN:

SSID:

Password:

NOVA_XXXX

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tenda Nova MW3 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Tenda Nova MW3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info