716681
17
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
17
t
Attention Risk of damage!!
During use, the screws can
loosen slowly and impair the
grill‘s stability.
Check that all screws are tightened be-
fore use. If necessary, tighten all screws
to guarantee stability.
Attention Risk of damage!!
Do not use any strong or abra-
sive solvents or scouring pads
as such products attack the
grill‘s surfaces and leave per-
manent markings.
Assembly
Preparation
Danger Risk of injury!
Failure to follow these instruc-
tions can lead to problems and
risks while using the grill.
Follow each assembly step described
here.
1. First, read the assembly instructions
thoroughly.
2. Allow yourself enough time for as-
sembly and find an even working
space of two to three square meters.
3. Small parts such as handles may be
preassembled.
4. Look out for sharp corners and wear
protective gloves for assembly.
Required tools
1 x Phillips screwdriver
1 x adjustable wrench
Assembling the grill
1. Unpack BBQ
Unpack the BBQ and dispose of all
packaging materials. Keep the packa-
ging materials out of the reach of child-
ren and dispose of them according to
regulations after BBQ assembly. Pay
attention to the illustration of the BBQ
during assembly.
2. Fasten the handles to the fire bowl
Fasten the handles (1b) to the fire bowl
(8) with spacers (G) and nuts (F). En-
sure that both handles have bevelled
ends.
3. Fasten the long support legs
First, insert the small side of the sup-
port leg caps (9) through the narrow
ends of the long support legs (11a).
Insert two M6x30 screws (C) with a
spacer (D) through the holes on the
right side of the handle of the fire bowl
(8). Turn the long support legs (11a)
with the support leg caps (9) loosely
on the screws. Turn the long support
legs so that the holes for the storage
grille (12) point inwards. Do not tighten
the screws yet.
4. Fasten the short support legs
First, insert the small side of the sup-
port leg caps (9) through the narrow
ends of the short support legs (11b).
Insert two M6x30 screws (C) with a
spacer (D) through the holes on the
left side of the handle of the fire bowl
(8). Turn the long support legs (11a)
with the support leg caps (9) loosely
on the screws. Turn the short support
legs (11b) so that the flat bottom sides
with the holes for the storage grille
(12) point inwards. Do not tighten the
screws yet.
P180198_TEPRO_1065N_KeyWest_K_DE_GB_20191016.indd 17 16/10/2018 6:26 PM
17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Tepro 1065N - Key West wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info