| 31
ENGLISH
Winding the bobbin
Draw the thread from spool. Guide the thread around the bobbin thread guide. Insert the thread through one of the holes in the bobbin from the inside to the outside.
Put the bobbin on the bobbin spindle, and push it to the right.
While holding the balance wheel with your left hand, turn the clutch knob counter-clockwise with your right hand.
With the free end of the thread held in your hand ,depress the foot control. Stop the machine when it has made a few turns, and cut the thread close to the hole in the bobbin.
Depress the foot control again. When the bobbin is fully wound, it will stop automatically. Return the bobbin winder to its original
Threading bobbin case
➀ Place the bobbin into the bobbin case. Make sure the thread
unwinds in the direction of arrow.
➁ Pull the thread into the bobbin case slot. ➂ Draw the thread under the tension spring and into the
delivery eye.
• Leave about 10 cm of free thread.
➀➁➂
