Bedienungsanleitung Tesco BB20 (Seite 8 von 12) (Englisch)

776392

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

RADIO PRESETS

There are 20 preset stations for each band you can use to store

your favourite stations for quick selection.

Automatic preset storage

The radio can scan the band and store all stations found as

presets (up to the maximum of 20 stations per band).

• Select FM or AM radio.

• Extend the aerial if you selected FM radio.

• Press and hold the /, button

The radio will scan the band automatically and store all

stations found as presets.

When the scan is complete the radio will return to play

preset 1.

Manual preset storage

• Tune to the station you want to store.

• Press the PROG button.

The display will show ‘P’ with a ashing preset number.

• Press } or { to nd the preset number you want to

store.

• Press PROG again to store the station as this preset

number.

The preset station will be stored.

Playing a preset station

To play a preset station you already stored.

• Press the } or { button until the preset number you

want is displayed.

After a short delay the stored preset station will tune

automatically.

LISTENING TO FM RADIO

• Extend the aerial fully.

• Press the FUNCTION button repeatedly until rAd1 is

displayed.

After a few seconds the display will change to show the

tuned frequency in MHz.

Scanning for a station

• Press and hold the TUNING + or TUNING - button.

The radio will scan up or down the band and will stop

scanning when a station is found.

• Press and hold the button again to continue scanning and

skip to the next station.

Manual and ne tuning

• Press the TUNING + or TUNING - button briey to tune up

or down the band in 50kHz steps.

Setting the radio to mono

When listening to a weak or distant FM station in stereo, there

may be a high level of background noise. In this case, setting

mono reception may reduce the level of background noise.

• Press the REPEAT button repeatedly to switch between

mono and stereo reception.

The stereo indicator (ST) will be displayed when the radio

is receiving stereo.

Adjusting the aerial for best reception

The telescopic aerial is on a swivel base.

• Move the aerial position to nd the best reception for the

station you are listening to.

The display shows CD track and play mode status.

LISTENING TO AM RADIO

• There is no need to extend the telescopic aerial for AM

radio reception.

• Press the FUNCTION button repeatedly until rAd2 is

displayed.

After a few seconds the display will change to show the

tuned frequency in kHz.

Scanning for a station

• Press and hold the TUNING + or TUNING - button.

The radio will scan up or down the band and will stop

scanning when a station is found.

• Press and hold the button again to continue scanning and

skip to the next station.

Manual and ne tuning

• Press the TUNING + or TUNING - button briey to tune up

or down the band in 9kHz steps.

Adjusting the aerial for best reception

The aerial for AM radio is inside the case and is directional.

• Rotate the position of the radio to nd the best reception

for the station you are listening to..

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tesco BB20 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info