Bedienungsanleitung Tesco LCD22-230 (Seite 26 von 30) (Englisch)

770534

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

General Information

OPERATING THE TV WITH A UNIVERSAL

OR SKY (BSKYB) REMOTE CONTROL

Using a Universal Remote Control.

You may wish to use a Universal Remote control to operate your Television. In order to do so, you

will need to enter the ‘code’ below into your universal remote control, to do this, please follow the

instructions included with the Universal remote control. Please note that if your remote control does not

accept the code, this is because the software/ﬁ rmware installed on the remote control is too old. Please

contact the manufacturer of the Universal Remote control for assistance.

Universal Remote Code - 2106 (TV functions) 2302 (DVD Functions - where included on the TV)

Using a Sky / Sky+ / Sky HD Remote Control

If you wish to use your Sky remote control to operate your Television, you need to programme a 4 digit

code into your Sky, Sky+ or Sky HD remote control.

Please note that the code below will only be accepted if the Sky remote control is a Revision 9 (launched

Autumn 2010) or later.

To ﬁ nd out which version of Sky remote you have, remove the battery cover, you should see a sticker

showing the ‘Rev’ number.

If your Sky remote is Rev 8 or earlier, you will need to purchase a new Sky Remote control in order to

operate the TV’s functions. At the point of manufacture of this TV, the latest Revision 9 remote controls

are only available to purchase directly from Sky, alternatively, you can purchase our versions from the

helpline / website.

If your Sky remote control is a Revision 9 or later, please follow the instructions below.

1) Press TV

2) Press and hold the ‘Red’ button and ‘Select’ at the same time until the red LED light at the top of the

remote ﬂ ashes twice.

3) Enter the code. If the code is accepted the red LED light will blink twice. If the LED only blinks once…

you have either entered the code incorrectly or the Sky remote isn’t a revision 9.

4) Press select to store the code.

5) Press the Standby button on your Sky remote control and the TV should go into standby mode.

Sky / Sky+ / Sky HD Remote code - 2134 (Revision 9 or later only)

The very latest versions of remote controls to operate your Sky

/ Sky+ / Sky HD in addition to operating the functions of the

Television can be purchased from the helpline or website.

Our versions (from One for All) are slightly smaller than the

regular Sky remotes and operate your Sky box the same way

your current Sky remote does, in addition, our versions operate

the functions of your television as they include the very latest

software/ﬁ rmware.

Please note that as we have to install the necessary software /

ﬁ rmware onto the remote control prior to shipping, you must

provide us with your TV model number in order that we can

do this.

Sky Sky+/Sky HD

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tesco LCD22-230 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info