Bedienungsanleitung Tesla Model 3 - 2020 (Seite 261 von 271) (Englisch)

719107

261

Zoom out

Zoom in

Vorherige Seite

1/271

Nächste Seite

(UMC_a017)

Charging speed reduced

High temperature

detected by Mobile

Connector

High temperature detected by Mobile

Connector alerts indicate the outlet used to

charge is becoming too warm, so charging

has been slowed to protect the outlet.

This is not typically an issue with your vehicle

or your Mobile Connector, but rather an issue

with the outlet. A warm outlet may be caused

by a plug that is not fully inserted, a loose

building wiring connection to the outlet, or an

outlet that is beginning to wear out.

To regain normal charge speed, make sure

your adapter is fully plugged into the outlet. If

charging speed does not return to normal,

contact an electrician to inspect the outlet

and building wiring connections to the outlet

and complete any repairs needed.

If the outlet is worn, it should be replaced

with a high-quality outlet. Consider upgrading

to a Tesla Wall Connector for greater

convenience and highest charging speed.

(UMC_w008)

Charging stopped

High temperature

detected by Mobile

Connector

High temperature detected by Mobile

Connector alerts indicate the outlet used to

charge is becoming too warm, so charging

has stopped to protect the outlet.

This is not typically an issue with your vehicle

or your Mobile Connector, but rather an issue

with the outlet. A warm outlet may be caused

by a plug that is not fully inserted, a loose

building wiring connection to the outlet, or an

outlet that is beginning to wear out.

To regain normal charge operation, make sure

your adapter is fully plugged into the outlet. If

charging speed does not return to normal,

contact an electrician to inspect the outlet

and building wiring connections to the outlet

and complete any repairs needed.

If the outlet is worn, it should be replaced

with a high-quality outlet. Consider upgrading

to a Tesla Wall Connector for greater

convenience and highest charging speed.

(VCFRONT_a182)

12V battery must be

replaced soon

Software updates will not

complete until serviced

The 12V battery has aged or degraded and

needs to be replaced. Until the battery is

replaced, vehicle software updates will not

complete.

It is recommended to replace the battery at

your earliest convenience. In the meantime,

continue normal use of the vehicle.

The vehicle is still OK to drive with this alert

present, for a period of time. However, if you

continually delay the 12V battery

replacement, the vehicle may eventually not

have enough power to start or restart.

If the 12V battery is too low to turn on the

vehicle or open the doors, follow the

instructions in

Jump Starting the 12V Battery

on page 237.

For more information on the battery system,

see Battery Information on page 191.

(VCFRONT_a192)

Electrical system power

reduced

Vehicle may shut down

unexpectedly

The electrical system cannot maintain the

voltage required to support all vehicle

features.

Troubleshooting Alerts

259Consumer Information

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tesla Model 3 - 2020 Seite 261

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Tesla Model 3 - 2020

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info