Bedienungsanleitung Teufel Cinebar 50 (Seite 9 von 16) (Englisch)

703890

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

· Cinebar 50

Cinebar 50 back · CD 50 SW connection

Please note

The Cinebar 50 System inde-

pendently recognises whether

the subwoofer output is being

used. If the jack is being used,

the sound will be adjusted

accordingly. If you are using the

CB 50 SW, this should always also

be switched on.

Note

If you want more powerful bass

effects, you can connect a larger

or second active subwoofer to

the subwoofer output.

Cinebar 50 Unit back

Power supply

Connect the appropriate power supply cable to

supply the Cinebar 50 Unit with power.

Analogue audio inputs

Use the Aux 1 and Aux 2 stereo inputs to connect

analogue signal sources. Use normal cinch cables

for the connection.

Digital audio inputs

You can connect compatible digital audio appli-

ances here. You can use either a coaxial or an

optical cable connection. You can also feed in

encoded, multichannel surround data using these

inputs.

Subwoofer output

Connect the CB 50 SW subwoofer to the Cinebar

50 System here.

The cut-off frequency is set at 150 Hz.

Connection to the CB 50 SW subwoofer

The subwoofer is directly connected to the Cine-

bar 50 Unit using the cinch cable supplied. If the

cable isn’t long enough you can use a longer, pre-

ferably high-quality cinch cable.

CB 50 SW back

Cinebar In

Connect this jack to the subwoofer output of the

Cinebar 50 unit.

Auto

This switch activates the automatic switch-on

function of the CB 50 SW. If there is an audio si-

gnal at the input, the subwoofer will switch on. If

there is no signal for a few minutes, the CB 50 SW

will switch to standby mode.

Volume

You can adjust the global output volume of the sub-

woofer using the level control. Please read the “Sub-

woofer volume” section on page 12.

Power

This rocker switch is used to switch the CB 50 SW

on and off.

Power supply

Connect the appropriate power supply cable to

supply the CB 50 SW with power.

Explanation of symbols

The arrow-headed lightning

symbol in an equilateral triangle

indicates the presence of a

dangerous non-insulated elec-

trical voltage within the system

housing and therefore a risk of

electrical shock.

The exclamation mark in an

equilateral triangle, as afxed

to the appliance, is to make

the user aware of important

operating and maintenance

instructions.

This product complies with

European Community guidelines

2004/108/EC and 2006/95/EC

The dustbin symbol printed

on our products’ type plates

and ampliers states that

Lautsprecher Teufel guarantees

proper disposal of these speakers

and subwoofers in line with the

Electrical and Electronic

Appliance Act.

This product is a safety class II

product in accordance with DIN

standard EN 61140 (VDE 0140-1)

and IEC 60417 and does not re-

quire a safety plug, only the plug

supplied (2-pole). The casing has

reinforced or double insulation

against electric shock.

Attention

The separating equipment of

this equipment is the mains

plug, this separating equipment

must be usable without

difculties.

W E R

Audio cable

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Teufel Cinebar 50 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info