Bedienungsanleitung Teufel Cinebase (Seite 10 von 20) (Englisch)

703897

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

10 • Cinebase

Setup and Connection

Setup Location

Simply place your TV set on the Cinebase.

CAUTION

Pay attention to the maximum carrying capacity of

the Cinebase of 60 kg in the process.

Location tips

• Select a stable, level base whose carrying capaci-

ty is adequate for the Cinebase and the TV set.

• Make sure that the environment is dry and free

from dust.

• Select a location away from heat sources and

direct sunlight.

• Lay the connector cables so that they do not pose

a tripping hazard.

• Do not place any heavy objects on the cables.

Setting the HDMI Operating Mode

Control signals are also transmitted via a HDMI

connection in addition to audio and video data. Your

new Cinebase uses the functions CEC and ARC:

CEC (Consumer Electronics Control)

This function makes it possible to control devices

via the HDMI connection. Thus, the Cinebase is

switched on and to standby with the TV set. With

many TV sets, you can also use the TV set's remote

control to set the volume of the Cinebase.

ARC (Audio Return Channel): TV sets equipped with

an ARC-capable HDMI jack can emit audio from the

television via this HDMI jack and an ARC-capable

HDMI cable. If your TV set has this capability, you

do not require any additional cables in order to play

television audio on your Cinebase.

These functions must be activated on the menu

with some TV-sets – please refer to the instruction

manual of your TV-set in this case.

To ensure that your new Cinebase works perfectly

with your TV set, use the HDMI MODE switch (1) to

set these functions.

NOTE

Make sure that before moving the HDMI MODE

switch (1), the Cinebase is turned on. When the

unit is off or in standby mode, the switch does not

work.

Move the HDMI MODE (1) switch to the desired

position:

• ARC + CEC OFF – ARC and CEC deactivated.

• CEC ON (centre) – CEC activated, ARC deactivat-

ed.

• ARC + CEC ON (right) – ARC and CEC activated.

Connecting

TV set

Connect your TV set to the HDMI TV jack (3) using

an HDMI cable.

If your TV set is not ARC-capable (see previous

section), you can transmit the television audio to the

Cinebase as an optical-digital or analogue signal:

Optical-digital: Connect the optical output of the

TV set to the OPTICAL IN jack (5) using an optical

cable with a Toslink plug.

Analogue: Connect the audio output of the TV set

with the ANALOG IN jacks (6) using a RCA cable.

Other source devices

You can use the unoccupied port(s) (5) and (6)

to connect other source devices (e.g. CD or MP3

players).

External HDMI device

Normally, you should connect the HDMI source de-

vices to your TV-set.

If your TV-set only has one HDMI jack and/or the

television audio is only transmitted as an audio

signal, you can connect an HDMI device (e.g. a game

console) to the HDMI IN jack (2). The Cinebase will

play back its audio with digital quality and send the

video signals to the television set via HDMI TV.

Power supply

Use the enclosed mains cable to connect the jack

(7) with the mains. Make sure that the socket is

easily accessible.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Teufel Cinebase Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Teufel Cinebase

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info