Bedienungsanleitung Teufel Cinepaq 3100 (Seite 14 von 28) (Englisch)

703901

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

14 • CP 5100 DR

Menu “ Audio”

If you are using a Teufel speaker set, you can use the

recommended values for some settings. For more informa-

tion, see “Teufel Presets” in this section.

“ Speaker Setup”

Set the speaker types. Smaller speakers may not be able

to handle low tones well and tend to distort the audio

signal; if no centre speaker is present, the voices of the

actors will be missing in movies; if no rear speakers are

present, surround sound effects will be missing. If set

properly, the CP 5100 DR is able to make optimal use of

the existing speakers:

Front – Size of the speakers to the left and right of the

screen: Small (small, compact boxes), Large (full-volume

speakers, upright boxes).

Center – Size of the middle speaker: Small, Large, Off –

with Dolby® Virtual Speaker (DVS), the mid-channel is

distributed to the left and right speakers.

Rear – Size of the rear speaker: Small, Large, Off – sur-

round sound is simulated using the existing speakers with

DVS.

Surround – Size of the rear speaker: Small, Large, Off –

surround sound is simulated using the existing speakers

with DVS.

Subwoofer – On or Off – If no subwoofer is connected,

the lowest tones will be emitted as best as possible via

the existing speakers.

Crossover – Sounds are emitted via the subwoofer up to

the frequency set here. The cut-off-frequency can be set in

the range 40 to 200 Hz. Move the marker on the scale

with the navigation buttons 40 “▲▼ ” and change the

value with the select button 41 “●”.

“ AV Mapping”

Assigning audio inputs to the video inputs: You want to

connect your PC via HDMI, but your sound card has an

optical audio output? Your DVD-changer has a compo-

nent output for video and a coax audio connection? Your

DVD receiver can handle this: Select the desired video

input and set the desired audio input for this.

Video Speaker Setup HDMI 1 HDMI 1

Audio AV Mapping HDMI 2 Aux 1

System Distance Aux 1 Aux 2

Exit Level Aux 2 Aux 3

Equalizer Aux 3 Coax 1

Teufel Preset1 Coax 2

Teufel Preset2 Opt 1

Opt 2

►

“ Distance”

If the speakers are located at different distances to the

listening position, surround sound will suffer. To com-

pensate for these run time differences, set the distances

from the listening position to each speaker from 0 to 10

metres. You can move the marker on the scale with the

navigation buttons 40 “▲▼ ” and change the value with

the select button 41 “●”.

“ Level”

Volume adjustment and sound test. Here, you can in-

crease or reduce the relative volume for each speaker.

Select the desired speaker and move the marker on the

scale with the navigation buttons 40 “▲▼ ” in the positive

(loud) or negative (soft) range. Apply the value by press-

ing the select button 41 “●”.

You can also change this setting with the special function

button “Level” (see “Special function buttons” on page

16).

With the option “Test Tone”, a noise signal will be emit-

ted from each speaker for approximately 2 seconds that

allows you to verify the settings. The test will end as soon

as you exit the submenu.

“ Equalizer”

Adjusting the sound in three frequency ranges: Select the

desired frequency range (treble, mid, bass) and move

the marker on the scale to the positive (up) or negative

(down) range using the navigation buttons 40 “▲▼ ”. You

can apply the value by pressing the select button 41 “●”.

“ Teufel Preset 1 + 2”

Presets for current Teufel speakers. Here you can auto-

matically set the recommended values for some Teufel

speaker sets (e. g. speaker size and crossover frequency).

Select your speaker set and apply the values by selecting

“OK”.

Video Speaker Setup Front Left

Audio AV Mapping Center

System Distance Front Right

Exit Level Rear Right

Equalizer Rear Left

Teufel Preset1 Subwoofer

Teufel Preset2 Test Tone

+ 10

+ 8

+ 6

+ 4

+ 2

– 2

– 4

– 6

– 8

– 10

►

91341 GB 20100924.indd 1491341 GB 20100924.indd 14 24.09.2010 9:58:07 Uhr24.09.2010 9:58:07 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Teufel Cinepaq 3100 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Teufel Cinepaq 3100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info