Bedienungsanleitung Teufel Columa 300 (Seite 22 von 52) (Englisch)

704030

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

22 • Impaq 8000

Menu “Speaker settings”

“Channel configuration”

Here you can specify the channels, which the speak-

ers are connected to. This ensures that the system

is able to optimally distribute the audio signal among

the speakers.

• 2.1 Only the front speakers on the left/right and

subwoofer.

• 5.1 All channels have been assigned speakers.

• 7.1 The (rear) channels are also connected via

the output AUX OUT / RC PRE OUT (20).

If the configuration is changed, the menu “Speaker

size” (see below) will automatically appear.

“Speaker size”

Here you can set the size of the speakers in use for

optimal actuation of the speakers. Depending on the

setting for “Speaker configuration” (see above), differ-

ent configurations are available for selection; they are

shown as a series of letters/numbers and graphically:

The letters represent the speakers:

Front channels

center

surround channels

rear channels

In this context, S stands for small and L for large

speakers.

The end number indicates whether a subwoofer is

present (“1”) or not (“0”).

Examples:

• S1: 2.1 system, small front speakers with a

subwoofer

• LSS0: 5.1 system, large front speakers, small

center and surround speakers, no subwoofer.

• LLLL1: 7.1 system, all large speakers, subwoofer

present.

“Crossover frequency”

If you use satellites and subwoofers, you should select

the optimal crossover frequency in the Impaq 8000.

Otherwise, the sound quality will suffer and the satel-

lites could be damaged.

With the crossover frequency, you define the frequen-

cy up to which the subwoofer and satellites should be

active. Possible values: 80 to 250 Hz in ten steps.

You can find information on the recommended cross-

over frequency in the technical data of the respective

satellite speakers in our webshop.

“Subwoofer phase”

You can hereby switch the phase shift (180°) on and

off for the subwoofer. Select the setting, with which

the subwoofer produces the loudest and clearest

sound.

Menü “Audio setup”

“HDMI transit”

If you switch to standby from HDMI mode, an HDMI

input signal will either be transmitted to the HDMI

output or blocked depending on the setting.

• On – signal will be transmitted in standby

• Off – signal is blocked.

“HDMI audio output”

Switches the audio transmission to the TV set on and

off at the HDMI output HDMI TV (13).

When playing back movies, you do not need to mute

the television in the “Deactivate” position in order to

hear sound from the receiver’s speakers only.

“HDMI output”

Determines the audio output at the HDMI output

HDMI TV (13). Possible values:

• PCM – The audio signal is mixed to 7.1 and trans-

ferred as PCM (normal setting).

• Bitstream – Passes on the data stream from the

Blu-ray disc unchanged (only for TV sets with Dolby

and DTS playback).

• Bitstream recoding – Passes the data stream of

the Blu-ray disc mixed and coded in a single data

stream. Suitable for Dolby TrueHD and DTS-HD

Master Audio.

“Down sampling”

Determines the sampling rate of the audio signal.

Possible values:

• 48 kHz – corresponds to CD quality

• 96 kHz – corresponds to DVD quality

• 192 kHz – no down-sampling (Blu-ray quality)

Settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Teufel Columa 300 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Teufel Columa 300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info