Bedienungsanleitung Teufel Columa 300 (Seite 26 von 52) (Englisch)

704030

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

26 • Impaq 8000

Menu “System”

“System information”

With this menu item, you can access the version of

the firmware of your Impaq 8000.

“Screensaver”

This darkens the screen after a configurable period of

inactivity, e.g. to prevent burn-in on plasma screens.

Possible values: 5, 10, 15, 20 minutes and Off.

“Auto Off”

After the screensaver activates (see above), the

receiver waits for the configured period of time to

elapse before automatically switching to standby.

Possible values: 30 minutes, 60 minutes, never.

“ Disk Auto Start”

With this setting, you determine whether playback will

automatically start or not after you insert a CD/DVD/

BD. Possible values:

• On – playback starts automatically (not possible

with some Blu-ray discs)

• Off – playback does not start automatically.

“ HDMI CEC”

If this function is activated, CEC-compatible devices

are controlled by a control command via the HDMI

connection. As a result, devices connected to the TV

set are e.g. automatically activated and deactivated

using the remote control for the television set.

Possible values: On, Off.

“ HDMI ARC”

The audio return channel (ARC) switches on to play

back the television audio via the HDMI cable (see „TV

set“ on page 14). The TV set must support this

function.

“ BD live storage”

The BD Live function creates a folder “ BUDA” stick for

saving data on the USB. You can delete data here if

the memory on your stick runs full.

• Information – Displays the available memory on

the inserted USB stick or displays “No USB”.

• Clear BD live data – clear the memory used by BD

Live on the USB stick.

“ DMR”

Switches the DLNA-DMR (Digital Media Renderer) on

and off (see „DLNA mode“ on page 37).

“ DivX® VOD DRM”

You can find the DivX

VOD registration code of your

Impaq 8000 here. You can register your device with

this code to permit you to play DivX

videos protected

by copyright and copy protection. For more informa-

tion, visit the website vod.divx.com.

“Firmware Update”

If the Impaq 8000 is constantly connected to the

Internet, it will check every time it turns on whether an

updated version of its operating software (“ firmware”)

is available and will initiate the update process after

confirmation.

You can manually load the update for your

Impaq 8000 via the Internet connection with this

menu item. For this, follow the on-screen instructions.

Alternatively, you can download

the new firmware from

the Teufel website

and save it on a USB stick. As soon

as you insert the USB stick in the USB port (14), the

new firmware will be detected. An info window on the

screen indicates this. Follow the instructions to install

the update.

The update will take several minutes, during which

time you must not turn off the device and interrupt the

Internet connection. After the update, you reset the

Impaq 8000 to the default settings (see the following

section).

“Default settings”

Here, you can reset all receiver settings to the default

settings. After the reset, you will have to reconfigure

your individual settings.

Settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Teufel Columa 300 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Teufel Columa 300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info