Bedienungsanleitung Teufel Impaq 7000 (Seite 17 von 32) (Englisch)

531254

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

• IP 7000 BR 17

Special function buttons

“RESOLUTION” button

The “Resolution” button 49 has two functions:

1. Zoom factor

You can change the zoom factor of the picture in this

order during video or image playback: 2x, 3x, 4x, 1/2x,

1/3x, 1/4x, 1x

2. Screen resolution

From the main menu, you can conﬁgure the resolution of

the television set for HD playback with this button. Pos-

sible values:

480/576i, 480/586p, 720p, 1080i, 1080p, HDMI-Auto.

HDMI-Auto automatically selects the highest possible

resolution for your television set.

Note: Only a resolution of 480/576p is available at the

video output 14.

Note: This function is also helpful if no picture appears

after your television set was connected. Then push this

button until the main menu becomes visible – always

brieﬂy wait until the TV has synchronised. Then you can

make additional settings.

“SURROUND” button

Pushing the “Surround” button 47 several times switches

surround sound:

2.1 stereo Stereo playback with the subwoofer

via the front channels.

5.1 Ch 5.1 channel surround sound.

7.1 Ch 7.1 channel surround sound (rear chan-

nels via external ampliﬁer).

Dolby PLII Movie Dolby® ProLogic II for movies.

Dolby PLII Music Dolby® ProLogic II for music.

Not all melodies are generally available. This depends

on the available audio signal. (Also see menu “AUDIO/

SURROUND”, page 15.)

“TONE” button

With the button 39 “Tone”, you can access sound control.

With the navigation buttons 33 “▲” and “▼” you can

select the desired range:

Bass low tones

Treble high tones

With the navigation buttons 33 “◀” and “▶”, you can

conﬁgure the selected range from “–10 dB” (lower) to “10

dB” (increase).

“LIPSYNC” button

As with the menu function of the same name, you can

conﬁgure the audio delay for certain inputs from 0 to

200 ms using the “LIPSYNC” button 48. (Also see menu

“AUDIO/Lipsync”, page 15.)

OSC

ZOOM

Select the desired input with the navigation buttons 33

“▲” and “▼” : HDMI 1, HDMI 2, BD, other Input (other

inputs).

Conﬁgure the desired delay with the navigation buttons

33 “◀” and “▶”.

“SPEAKER LEVEL” button

With the “SPEAKER LEVEL” button 38, you can increase

or decrease the relative volume for each speaker from

“+10 dB” to “–10 dB”.

With the navigation buttons 33 “▲” and “▼”, you can

select the desired speaker channel:

FL – Front left

Center – Center

FR – Front right

SR – Surround right

RR – Rear right

RL – Rear left

SL – Surround links

Sub – Subwoofer

With the navigation buttons 33 “◀” and “▶”, you can

conﬁgure the selected speaker level.

Buttons “A B C D”

With the coloured buttons 43 “A B C D”, you can navi-

gate through the menus of interactive BluRay discs.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Teufel Impaq 7000 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info