562413
15
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
15
Frequently Asked Questions
fully check if your order contains a
Raumfeld Base (also see page 11)
and choose the appropriate path in
the setup wizard.
Problem solving
Question 1: My Controller doesnt react.
How can I reboot it?
When the Controller no longer reacts
to finger touch or turning the volume
control:
1. First switch off the device by pushing
and holding the On/Off button for at
least 10 seconds.
2. Now, briefly press the On/Off
button. After approximately two
seconds the Raumfeld Logo is
displayed and the Controller is
started.
Question 2: Can I reset the system and
start installation from the beginning?
If the Controller is connected to your
Raumfeld system, you can restart the
setup wizard by resetting the „Controller
configuration“ under „Settings > System
maintenance > Reset.
If the Controller is not connected to the
system, a help option will appear after a
short time, offering a possibility to reset.
WiFi Connection
The wireless connection of my Controller
is constantly low or breaks out altogether.
What can I do?
Should the wireless connection of the
Controller drop below 50% in various
rooms throughout your house, you
should take action to improve reception.
In a system with the Raumfeld Base (see
also page 11) the devices are generally
connected to the Bases Wi-Fi network.
If the signal of your own Wi-Fi router is
much better throughout your house than
that of the Raumfeld Base, it is advis-
able to connect the Controller to your own
Wi-Fi router. Instructions on this topic can
be found in our online manual. If both the
signal from the Base as well as the signal
from your personal access point is low, we
recommend the use of a generic wireless
repeater to improve the signal strength.
Setting up music resources
Question 1: The Raumfeld Base does
not appear under “Network” in the
Windows Explorer. What can I do?
Enter \\Raumfeld Base into the
address line of your Windows Explorer
(not Internet Explorer!).
Should that not work enter the IP
address of the Raumfeld Base into the
address bar, e.g. \\192.168.0.15.
Question 2: The Raumfeld Base does
not appear under “File sharing” in the
Mac OS Finder. What can I do?
Open the menu item “Go > Connect
to server...” in the Finder. Then enter
smb://base.local into the field “Server
address” and confirm the dialog box
that appears afterwards.
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Teufel Raumfeld Controller wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info