Bedienungsanleitung Teufel System 4 (Seite 7 von 16) (Englisch)

703864

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

· System 4

Accessories (optional)

Optional accessories for the System 4 set

Teufel offers the following accessories for your

System 4:

System 4 EX set

If you own a 7.1 AV receiver,

you can purchase a “5.1

ĕ 7.1” EX set to expand

your System 4 loudspeaker

setup into a full-blown

7.1 system. The EX set

consists of two additional

M 450 FCR speakers, to be mounted centrally be-

tween the side rear speakers (see page 11).

Teufel speaker cable 2 x 2.5 mm

Highly flexible copper

core (650 strands) with a

transparent sleeve and

polarity markings. The 2 x

2.5 mm

cable can be used

for cable distances up to 15 metres. For longer

distances, we recommend the thicker 2 x 4 mm

cable. In response to customer demand, all our

audio cables are now pre-wired for typical usage

lengths.

Teufel speaker cable 2 x 4 mm

Hundreds of ultra-thin, low-

oxygen copper wires (pro-

tected by a thick, flexible,

transparent plastic sleeve

that withstands almost any

stress) ensure that your audio signals are passed

to the speakers cleanly and without being com-

promised by underdimensioned cabling.

Teufel NF mono RCA cable

This cable is designed for

connecting active subwoof-

ers to AV receivers/amplifi-

ers, and is shielded against

magnetic interference. A

reliable connection is guaranteed by sturdy, gold-

plated connectors. This cable is available in sever-

al different lengths (2.5 to 15 metres) to perfectly

match your requirements.

Y adapter

1 x socket to 2 x connector.

A Y adapter lets you feed

a mono sub signal to both

of the subwoofer's stereo

inputs; this increases the

subwoofer's overall vol-

ume.

M 620 P speaker stand (black)

The M 620 P has a black

base mount and was

designed to aestheti-

cally match the System 4

speakers. The stand's two

sleek columns seem to

make the speaker float in

mid-air. Thanks to the es-

tablished Teufel speaker

mounting method – inte-

grated fittings and packing

screws – the speaker is securely fastened to the

stand. At a stand height of 68 cm, the FCR sat-

ellite speakers are automatically placed at the

proper surround system height.

Please note that this stand is not suitable for

the M 450 D satellite speakers – dipole speakers

should always be wall-mounted.

Teufel banana plugs

These high-quality, multi-pur-

pose speaker connectors from

Teufel are an affordable option

to ensure faultless connec-

tions between your loudspeak-

ers and amplifier/receiver.

The rugged banana-design

screw connector securely

holds cables up to 4 mm

in diameter. Low-resistance plug connections

are ensured by flexible spring contacts and solid

gold plating. Banana plugs are sold in pairs only,

marked red and black respectively. The System 4

loudspeaker set requires 10 banana plugs for a

5.1 setup, or 14 for a 7.1 setup.

If you require any optional

accessories, you can easily

order these directly from the

Accessories section of our

online store:

www.teufel.eu

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Teufel System 4 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Teufel System 4

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info