Bedienungsanleitung Teufel T 130 D (Seite 3 von 4) (Englisch)

562452

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

Unpacking, Setup and Connection

Unpacking

• Carefully open the boxes, remove the speakers together

with the EPE foam parts and remove the foam parts without

touching the diaphragms.

Setup

Note

Our website contains comprehensive notes for correct setup.

• Select a stable, level base.

• Make sure that the environment is clean and free from dust.

• Avoid placing the unit close to sources of heat or in direct

sunlight.

• Arrange the connector cables so that they do not pose a trip

hazard.

• Do not place any heavy objects on the cables or the speak-

ers.

• Pay attention to a solid state of the speaker to avoid vibra-

tions.

• A toggle switch, with which you can switch between normal

and dipole mode, is located between the connector termi-

nals of the T 130 D rear speakers. The sound is emitted from

the front and back in dipole mode.

front

rear

Possible arrangements

There are two possible arrangements for these speakers:

Normally, the dipole rear speakers are set up or hung up at head

height (140 to 210 cm) to the side of the listener. In the process,

the speakers are switched to dipole mode and project sound to

the front and back. The distance to the rear wall should be no

less than 10 cm.

The second arrangement possibility is suitable for narrow

rooms. In this case, the rear speakers are placed at a height of

140 to 210 cm behind the listener and situated at a 45 degree

angle. This way, the speakers project sound towards the walls

and produce the desired spatial diffusion in dipole mode. The

distance to the walls should not be less than 10 cm in this case

Mounting

You can ﬁ nd special assembly materials (cords, speaker

stands, wall brackets and resonance dampers) adapted to

these speakers in our webshop.

Removing the protective grids

The protective grids are secured by magnets on the front of

the speaker and can be easily removed. When the protective

grids are removed, high frequency output becomes clearer in

particular.

To remove the protective grids, reach behind them and slowly

pull them off to the front.

Attention

Risk of damage!

Make sure that you do not touch the highly sensi-

tive diaphragms.

Connecting

Danger

Danger of injury/damage!

Arrange the cables so that they do not pose a

trip hazard.

1. Pull the power plug of your ampliﬁ er/AV receiver out or multi-

channel active subwoofer of the outlet.

2. Lay the speaker cables from your ampliﬁ er/AV receiver or

multi-channel active subwoofer to each speaker. These

cables should be high-quality double-wire speaker cable with

marked strands. The diameter should amount to at least

1.5 mm

3. A connector comprising two terminals is located on the

back side of each speaker, to which you have to connect the

speaker cables.

The terminal clips are each marked red (+) and black (-).

Make sure the polarity is correct!

Connect the like coloured terminals. Otherwise the

sound quality will suffer.

The speaker connections of your

ampliﬁ er/

AV receiver or

multi-channel active subwoofer

should be marked similarly.

The strands of the speaker cables are marked with different

colours or shapes.

4. Split the single wire down to approx. 30 mm on both ends

and strip approx. 10 mm of insulation off of each cord.

5. Twist the stripped single wire ends together so that no wire

protrudes. Tin coating is not necessary.

6. Turn the connector terminal counterclockwise until loose.

Run the stripped cable end into the now visible hole. Close

the terminal by turning it counter clockwise. The cable has

now been clamped in place.

7. Connect the cables to the other speaker in the same way.

8. Connect the speaker cables to your ampliﬁ er/AV receiver or

multi-channel active subwoofer. The operating instructions of

the appliance should contain notes on this.

9. Reinsert the power plug of your ampliﬁ er/AV receiver or

multi-channel active subwoofer into the outlet.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Teufel T 130 D Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info