Bedienungsanleitung Teufel US 6112 (Seite 18 von 24) (Englisch)

703876

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

18 • US 6112/6 RHD

Distance

The surround sound effect may be disrupted if the speak-

ers are positioned at different distances to the listening

position. To compensate for these differences in run

time, you can set a slight signal delay for all channels.

Measure the difference from the listening position to the

speakers and enter these values in the menu.

“System configuration” menu

HDMI

CEC (Consumer Electronics Control)

If this function is activated (ON), CEC-compatible devices

are powered up and down by a control command via the

HDMI connection.

ARC (Audio Return Channel)

With a HDMI connection this channel offers a return

channel for audio data from television sets that support

this function. This allows the audio signal to be transmit-

ted from the television set to the subwoofer’s ampliﬁ er

without having to connect another cable. With the ARC

function activated, select the television audio with the

button 25 Coax 1.

Possible settings: OFF, ON.

Important!

Please note that many television sets only have

one HDMI input that supports the ARC function.

An activated CEC function is required for the ARC function.

Note: When the CEC-Function is activated, standby

power consumption is increased.

Standby mode

You can activate automatic activation and deactivation

with this:

Auto On The subwoofer turns on as soon as an au-

dio signal is detected at the analogue input

“Aux 1”. “Aux 1” is automatically selected

as an active source in the process.

Auto On/Off Same as above, but the subwoofer

switches to standby once no signal has

been present at the “Aux 1” input for a few

minutes.

Off Automatic activation/deactivation is not

activated.

Activation level

Here you can set the volume of your device when it is

turned on:

• last: The last volume set when powered off.

• ﬁ xed: You set the volume from -70 dB (low) to +10 dB

(very loud).

5.1/7.1

This allows you to switch between 5.1 and 7.1 mode and

set the function of the analogue output 11 “RC/Pre Out”

(also see “Analogue audio output” on page 10), which

you can connect to a stereo ampliﬁ er, active speakers or

a wireless transmission system. This makes it possible to

project sound into another room or to connect to the rear

speakers in 5.1/7.1 mode with a wireless transmission

system (such as the Teufel RearStation 4).

5.1+2ch Convert the 5.1 audio signal to two stereo

channels (2.0); volume is adjusted accord-

ing to master level.

5.1+2ch ﬁ x Same as before, but without volume adjust-

ment.

5.1+Surr 5.1 mode with emission of the effect chan-

nels (surround).

7.1 7.1 mode with emission of the rear chan-

nels (rear).

D/E

You can set the screen menu language this way. Possible

values: German, English

System Reset

This resets the device to the factory default.

91796 GB 20120524.indd 1891796 GB 20120524.indd 18 24.05.12 16:0324.05.12 16:03

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Teufel US 6112 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info