Bedienungsanleitung Texas Hobby 380TG (Seite 14 von 49) (Deutsch, Englisch, Dänisch, Französisch, Polnisch)

636702

Zoom out

Zoom in

Vorherige Seite

1/49

Nächste Seite

Storage

• If the machine is likely to be stored unused for

prolonged periods, follow the instructions below.

This will ensure longer machine lifetime.

• Use a garden hose to wash off soil and dirt.

Remove any grass, etc. from the rotor shaft. The

chassis number should only be cleaned with a

damp cloth to avoid unnecessary wear. Avoid using

a high-pressure washer during cleaning.

• Wipe the tiller with a damp cloth so that all surfaces

are clean. Wipe the surfaces down with an oily cloth

to prevent rust.

• Always store the machine in a dry, clean location.

Troubleshooting

The motor will not start

1. Check the fuel control is set correctly.

2. Check the spark plug.

3. Check there is fresh gas in the tank.

4. See separate motor instructions for further

troubleshooting.

The motor is not running smoothly

1. Ensure the throttle control is not set to max.

2. Check there is fresh gas in the tank.

The blades will not rotate

1. Check for stones lodged between the blades.

2. Release any stones by removing the blades.

3. Check the cables are in good working order and

fitted correctly.

4. Check the belt is in good working order and fitted

correctly.

5. Ensure the belt tensioner is adjusted correctly.

The blades will not stop

Stop the engine and contact your dealer.

Noise, vibration and precautionary measures

1. Long-term exposure to noise levels exceeding 85

dB (A) are damaging. Always use ear defenders

when the machine is being used.

2. Reduce the running speed of the motor to reduce

vibration and noise levels.

3. To reduce noise levels further, only use the machine

in an open environment.

4. Vibrations can be reduced further by holding the

handle firmly.

5. To avoid disturbing others, the machine should only

be used during the daytime.

6. Always wear close-fitting work clothes, hard-wearing

work gloves, ear defenders and non-slip boots with

steel toecaps.

7. Take a 30-minute break every 2 working hours.

8. A worn belt has to be replaced/ serviced by a

authorized dealer

Specification

Hobby

Model Hobby 380TG Hobby 400B Hobby 480BR Hobby 380TGR

Length (mm) 1210 1210 1210 1210

Width (mm) 510 510 510 510

Height (mm) 1020 1020 1020 1020

Weight (kg) 27,5 28 29 28,5

Forward gears 1 1 1 1

Reverse gears 0 0 1 1

Handle Adjustable Adjustable Adjustable Adjustable

Working width 38 cm 38 cm 38 cm 38 cm

Working depth 20 cm 20 cm 20 cm 20 cm

Rotation speed,

blades

130 rpm 130 rpm 130 rpm 130 rpm

Grease type Multifak EP-0

Engine

Brand PowerLine B&S B&S PowerLine

Model TG385 B&S 450 / 500E B&S 450 TG385

Capacity 113 CC 148 / 140 CC 148 CC 113 CC

Max power 1.95 kW / 3200 rpm

1,95 / 2,06 kW

3200 rpm

1,95 kW / 3200 rpm 1.95 kW / 3200 rpm

Sound power level of

machine

WA: 93 dB(A) LWA: 93 dB(A) LWA: 93 dB(A) LWA: 93 dB(A)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Texas Hobby 380TG Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info