514296
30
Zoom out
Zoom in
Vorherige Seite
1/113
Nächste Seite
eZ430-Chronos Control Center PC Software
www.ti.com
3.3 eZ430-Chronos Control Center PC Software
The eZ430-Chronos Control Center software provides several features demonstrating the wireless
capabilities of the kit on Windows and Linux operating systems. Different RF protocol stacks are
automatically selected for use, depending on the function. Available features:
3D acceleration graph with PC mouse control
Wireless remote control / PowerPoint control
Time, date, and calibration data synchronization tool
Heart rate and speed simulator
Wireless firmware update
NOTE: Connect the USB RF access point to the PC before launching the Control Center software.
For first time use, wait until Windows has finished the access point driver installation.
In case of problems on Windows PCs, check if the settings for the RF access point are
correct in the Windows Device Manager Start > Control Panel > System > Hardware >
Device Manager. The RF access point is listed under Ports (COM & LPT) as TI CC1111
Low-Power RF to USB CDC Serial Port. The port settings should be:
Baud Rate: 115200
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
In case of problems on Linux PCs, ensure that the correct tty setting is specified. Check /dev
for the new tty device after plugging in the RF access point. If the RF access point is
assigned to a device other than ttyACM0, either remove the serial device that occupies this
slot (for example, a modem), or change the script file variable "com" in
eZ430-Chronos_CC_1_2.tcl located in /home/<user name>/Texas
Instruments/eZ430-Chronos/Control Center/eZ430-Chronos Control Center.
To launch the Control Center software on a Windows PC, shortcuts are available on the Desktop and in
the Start Menu under Programs > Texas Instruments > eZ430-Chronos > eZ430-Chronos Control Center.
To launch the Control Center software on a Linux PC, browse to /home/<user name>/Texas
Instruments/eZ430-Chronos/Control Center/eZ430-Chronos Control Center and run
eZ430-Chronos_CC_1_2.tcl.
The different features are grouped onto tabs of the Control Center window. The tabs also indicate which
radio protocol is used.
30
eZ430-Chronos Software SLAU292DNovember 2009Revised March 2011
Submit Documentation Feedback
© 2009–2011, Texas Instruments Incorporated
30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Texas Instruments eZ430-Chronos wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info