709527
1
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
1.ENG
The TI.25X Solar Calculator
The TI-25X Solar calculator offers you a wide range of
mathematical and statistical capabilities. This manual
explains these capabilities.
Basic Operations
To turn the calculator on, expose the solar panel to
adequate light and press + ([
ON]).
Key
Function
+
([ON])
If the calculator is off, turns the unit on,
clears the display, and resets angle units to
degrees.
-
When pressed once during a calculation
(but before an operation key), clears the
displayed entry and any error condition (E).
You can make a new entry and continue
with your calculation.
Pressing
-
does not clear the memory,
statistics register, or angle-unit setting.
`
Instructs the calculator to perform the
second function (written above the key) of
the next key pressed.
2.ENG
The Display
You can enter a maximum of eight digits in the display. Any
digit key pressed after the eighth is ignored.
Indicator
Meaning
The displayed number is negative.
2nd
The
`
key has been pressed to access
the second function (written above the key)
of the next key pressed.
D
Angle units are set to degrees.
R
Angle units are set to radians.
G
Angle units are set to grads.
( )
One or more parentheses are open.
STAT
The calculator is in statistics mode. That is,
the statistics register contains data.
K
A number and operation are stored as a
constant.
M
A number other than zero is stored in
memory.
E
An error has occurred. You must press
-
or
to clear the error.
3.ENG
Scientific Notation
In scientific notation, a number is expressed as a mantissa
multiplied by 10 raised to a power (exponent).
Key
Function
a
Example: To enter 1.2345 × 10
6
:
1.2345
a
6 1.2345 06
`
\
Removes a displayed result from scientific
notation and displays it in standard decimal
format.
Entering a Number in Scientific Notation
1. Enter the mantissa. If it is negative, press @.
2. Press a. Two zeros appear on the right side of the
display.
3. Enter the exponent (one or two digits). If it is negative,
press @. If you press an incorrect digit key, just
reenter the correct digits.
Converting a Number to Scientific Notation
To convert a displayed number from standard display
format to scientific notation, press n 1 a l.
mantissa
exponent
floating mantissa sign
exponent sign
4.ENG
Correcting Entry Errors
At any point in a calculation, you can press - twice to
clear all calculations, including any errors, and start over.
Clearing an Error Condition
The display shows E when an error, overflow, or underflow
occurs or when you enter an improper operation. No entry
from the keyboard is accepted until you press -, which
clears the error condition and all pending operations.
Order of Calculations
The Algebraic Operating System (AOS™) of the TI-25X
Solar completes operations in the order of priority listed
below.
1. Single-variable functions (trigonometric, logarithmic,
square, square root, factorial, percent, reciprocal, angle
conversion, and change sign).
2. Two-variable functions:
¦ Exponential (y
x
) and roots (
x
y)
¦ Multiplication and division
¦ Addition and subtraction
3. l completes all operations.
8.ENG
Constant Calculations
The constant key h simplifies repetitive calculations by
storing a number and its associated operation for repeated
use.
To enter a constant operation:
1. Key in the repetitive number (m).
2. Press the operation key you want.
3. Press h.
Key
Function
m
p
h
Adds m to each subsequent entry.
m
o
h
Subtracts m from each subsequent entry.
m
n
h
Multiplies each subsequent entry by m.
m
m
h
Divides each subsequent entry by m.
m
Z
h
Raises each subsequent entry to the mth
power.
m
`
l
h
Takes the mth root of each subsequent
entry.
After storing the constant, you can complete each repeated
calculation by simply entering the new number and pressing
l. To erase the constant, clear the calculator or enter any
of the above arithmetic keys.
9.ENG
Angle-Unit Setting
Before starting a trigonometric calculation, use the K key
to select the appropriate angle-unit setting (DDegree,
RRadian, or GGrad).
Key
Function
K
Changes the angle-unit setting without
affecting the displayed angle value.
`
x
Changes the angle-unit setting and converts
the displayed angle value to its equivalent
for the new setting.
Example: Convert 45
°
. (If necessary, press
K
until D is displayed.)
45 D 45.
`
x R 0.7853982
`
x G 50.
`
x D 45.
Trigonometric Functions
Key
Function
W
,
X
,
Y
Calculates the sine, cosine, or tangent of
the displayed angle.
Example:
90
W
o
30
X
l
0.1339746
`
u,
`
v,
`
w
Calculates arcsine, arccosine, or arctangent
of the displayed value.
Example: 1 ` u 90.
10.ENG
Degree Format Conversions
An angle measured in degrees, minutes, and seconds
(DMS) must be converted to decimal degrees (DD) before
you can use it in a calculation.
Degrees, Minutes, and Seconds
DMS angles are entered in D.MMSSsss format.
D Degrees (°)0 to 8 digits
. Decimal point separator
MM Minutes (')must be 2 digits
SS Seconds (")must be 2 digits
sss Fractional part of a second
For example, enter 48°5'3.5" as 48.05035.
Decimal Degrees
DD angles are entered in D.ddddddd format.
D Degrees (°)
. Decimal point separator
ddddddd Fractional part of a degree
For example, enter 34.047° as 34.047.
13.ENG
Statistics Functions
The TI-25X Solar can perform statistical analysis on one-
variable data.
Key
Function
g
Enters the displayed number into the
statistics register as a data point.
`
z
Removes the displayed number from the
statistics register.
`
Calculates the mean of the entered data.
`
ƒ
Calculates the population standard deviation
of the entered data (n weighting).
`
Calculates the sample standard deviation of
the entered data (n
.
1 weighting).
`
ƒ
V
Calculates variance using n weighting (for
population data).
`
V
Calculates variance using n
.
1 weighting
(for sample data).
`
Calculates the sum of the entered data
points.
`
Calculates the sum of the squares of the
entered data points.
`
[CSR]
Clears all data from the statistics register
and the STAT indicator.
14.ENG
Example: Analyze the following test scores. Assume that
the four students are the entire population: 96, 81, 87, 70.
Comments
Keystrokes
Display
Clear display
-
0.
Clear register
`
[CSR]
0.
1st entry
96
g
1.
2nd entry
81
g
2.
3rd entry (incorrect)
97
g
3.
3rd entry (removed)
97
`
z
2.
3rd entry (correct)
87
g
3.
4th entry
70
g
4.
Mean (class average)
`
83.5
Standard Deviation
`
ƒ
9.4472218
Variance
V
89.25
Important: Remember to press ` [CSR] to clear the
statistics register and return to arithmetic calculations.
15.ENG
Error Conditions
The display shows E when an error occurs or when you
attempt certain operations. Press - to clear an error
condition.
In Case of Difficulty
1. If the digits fail to appear on the display:
¦ Check to be sure that no part of the solar panel is
covered.
¦ Check the intensity of the light source. The light
may be too dim to operate the calculator.
2. Press + and try the calculation again. Review the
operating instructions to be certain the calculations
were performed properly.
3. Press +, ` 4, and r to reset the display
and prepare the calculator for use.
16.ENG
TI Product and Services Information
For more information about TI products and services,
contact TI by e-mail or visit the TI calculator home page on
the world-wide web.
e-mail address: ti-cares@ti.com
internet address: http://www.ti.com/calc
Service and Warranty Information
For information about the length and terms of the warranty
or about product service, refer to the warranty statement
enclosed with this product or contact your local Texas
Instruments retailer/ distributor.
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Texas Instruments TI-25X Solar wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info