Bedienungsanleitung Texas MPC 1500 (Seite 8 von 11) (Englisch, Dänisch)

636713

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

GB Original instructions

Illustrations ................................................................... 2

Warning symbols .......................................................... 4

Safety ........................................................................... 8

Identification of the parts .............................................. 8

Mounting ...................................................................... 9

Working depth adjustment............................................ 9

Operation ..................................................................... 9

Change of aerator roll ................................................ 10

Storage and maintenance .......................................... 10

Technical specifications ............................................. 10

Warranty terms and conditions ................................... 10

CE Certificate of conformity ........................................ 11

IMPORTANT !

Do not continue use the lawn raker, when the grass

catcher is already full. This can overload the motor, as

high heat can occur.

Make sure to check and empty the graas catcher often.

It can quickly become full, if there is a lot of moss in

the lawn or working depth is deep.

Safety

Setup

Do not put hands or feet near or under rotating

parts.

Read this manual carefully. Make sure that you are

familiar with the different controls, settings and

handles of the equipment.

Know how to stop the unit and ensure that you are

familiar with emergency stop.

Never allow children or people unfamiliar with

these instructions to use the machine. Note, that

local regulations can restrict the age of the

operator.

If you feel unwell, tired or have consumed alcohol

or drugs, do not operate the machine.

Always inspect the machine before usage Ensure

that no parts are worn or damaged.

Replace worn out or damaged elements and bolts

in sets to preserve balance.

The operator of the machine is responsible for

people’s safety.

Never use the machine near children or animals.

The operator of the machine is held liable for any

accidents or hazards to other people and their

property.

Thoroughly inspect the area, where the equipment

is to be used, if necessary remove any foreign

objects.

Boots with non-slip soles with steel jacket is

required. Avoid loose-fitting clothes.

Operation

After striking a foreign object, stop the engine

immediately, disconnect the power cord and

inspect the machine thoroughly for damage. Repair

the damage before continuing.

If the machine should start to vibrate abnormally,

stop the motor and check immediately for the

cause. Vibration is generally a warning of damage.

Always turn off the motor and ensure that all

moving parts have come to a complete stop before

making any repairs, adjustments, or inspections.

Exercise extreme caution when operating on

slopes.

Never operate the machine at a fast pace.

Do not overload machine capacity by attempting to

push at too fast a rate.

Do not carry passengers.

Never allow any bystanders in front of unit.

Only operate the machine at daylight or in fully

illuminated areas.

Ensure a stable foothold and always keep a firm

hold on the handles. Always walk, never run.

Do not operate the machine when barefoot or

wearing sandals.

Exercise extreme caution when changing direction

on slopes

Never attempt to make any adjustments, while the

engine is running.

Use extreme caution when reversing or pulling the

machine backwards

Maintenance and storage

The engine shall be stopped when carrying out

maintenance and cleaning operations, when

changing tools and when being transported by

means other than under its own power.

Check regularly that all bolts and nuts are

tightened. Retighten if necessary.

The engine must be completely cooled off before

storing indoors or covered.

If the machine unused for a period of time, please

refer to the instructions in this manual.

Maintain or replace safety and instruction labels, as

necessary.

Only use orginal spare parts or accessories.

If not orginal parts or accessories is used, the

liablility is no longer applied.

Miscellaneous

Factory-fitted control devices, such as the handle-

mounted power cords, must not be removed or

exposed.

Ensure that the machine is properly secured when

transported on a flatbed etc.

Waste electrical products must not be

disposed of with the household waste. This

tool should be taken to your local recycling

centre for safe treatment.

The lawn raker is manufactured according to the latest

safety requirements. Every precaution is only effective

when it is followed exactly. Use the following description

when you mount your lawn raker.

Identification of the parts

See Illustration 1:

A. Switch lever

B. Safety button

C. Power cord

D. Cable hook

E. Rear safety guard

F. Carrying handle

G. Height adjustment

H. Crass catcher

I. Scarifier cylinder with springs

J. Aerator cylinder with blades

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Texas MPC 1500 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info