636712
10
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
10
Box Contents
Figure 1.
1. 1. Machine
2. 2. Operating manual and motor instructions
The lawn spiker is almost ready for use. Only the handlebar needs to be fitted.
Fit the bottom handlebar using the accompanying bolts. Figure 6.
Fit the top handlebar, unfold the handlebar and secure it in the required position with the
grips. See figure 2, c.
Use
Before use, follow the instructions for readying the motor in the
motor instruction manual.
Before using the machine, remove all foreign objects from the vicinity. Stones, glass,
branches and similar items can damage the machine. Also check that all bolts are
tightened.
Control oil levels before starting the motor.
Start:
Set the gas handle to choker / full gas, figure 2,a.
Follow motor start instructions.
Stop:
Set the gas handle to minimum gas, figure 2,a.
Follow motor stop instructions.
The clutch grip on the handle is used to activate the rotating blades under the machine. It
is important that the clutch allows for connection under operation, i.e. the clutch trigger is
to be held tight up against the handle.
Figure 2, b.
The rotating blades disengage automatically when the trigger is released.
Working depth can be adjusted using the handle on the right hand side of the machine,
(figure 3, b).
The machine can be lifted to its transport position by using the handle on the right hand
side of the machine, (figure 4, a).
Under Operation
The lawn spiker is used to loosen moss, etc. from the lawn. The machine’s blades rotate in
the direction of travel, thereby helping to propel the machine forward.
Start the motor and lower the machine to the ”work” position using the handle on the right
hand side of the machine. Activate the clutch trigger and engage the motor fully. Move the
lawn spiker forwards and backwards across the lawn. After the first aeration remove any
lose moss from the lawn. In the event that there is still moss in the lawn, aerate again at an
angle of 90 degrees to the previous aeration.
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Texas Pro Cut 420 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info