Bedienungsanleitung Texas PRO TRIM 560 (Seite 11 von 18) (Deutsch, Englisch, Dänisch, Französisch)

636716

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

Adjustment of the cutting height

Follow the adjustment procedure as shown in illustration 5

It is possible to adjust the cutting height on the trimmer head.

There are two different cutting heights on the trimmer. If the

trimmer head is placed on top the cutting height 65 mm if the

head down the cutting height 35 mm

Use an 3 mm Allen wrench

Cleaning

The machine should be cleaned after use. Use a garden

hose to wash off soil and dirt. Remove the trimmer head from

the trimmer axel to remove wedged grass etc. from the rotor

shaft. The chassis number should only be cleaned with a

damp cloth to avoid unnecessary wear. Avoid using a high-

pressure washer during cleaning.

Changing the oil

The oil should initially be changed after the first 5 hours of

use, and thereafter once per year. Use an oil extractor kit.

1. Suck the oil up through the oil filler hole using the

syringe. Use the hose to reach the sump.

2. Transfer the used oil to the container.

3. Fill the engine with new SAE-30 oil.

4. Check the oil level using the dipstick.

Remember to dispose of used oil in a safe way.

Oil and oil extractor kit are not included

Storage

• If the machine is likely to be stored unused for

prolonged periods, follow the instructions below.

This will ensure longer machine lifetime.

• Use a garden hose to wash off soil, grass and dirt.

Remove any grass, etc. from the shaft. The chassis

number should only be cleaned with a damp cloth to

avoid unnecessary wear. Avoid using a high-

pressure washer during cleaning.

• Wipe the machine with a damp cloth so that all

surfaces are clean. Wipe the surfaces down with an

oily cloth to prevent rust.

• Always store the machine in a dry, clean location.

Troubleshooting

The motor will not start

1. Check the fuel control is set correctly.

2. Check the spark plug.

3. Check there is fresh gas in the tank.

4. See separate motor instructions for further

troubleshooting.

The motor is not running smoothly

1. Ensure the throttle control is not set to max.

2. Check there is fresh gas in the tank.

The trimmer will not rotate

1. Check the cables are in good working order and

fitted correctly.

2. Check and remove wedged grass.

Noise, vibration and precautionary measures

1. Long-term exposure to noise levels exceeding 85 dB

(A) are damaging. Always use ear defenders when

the machine is being used.

2. Reduce the running speed of the motor to reduce

vibration and noise levels.

3. To reduce noise levels further, only use the machine

in an open environment.

4. Vibrations can be reduced further by holding the

handle firmly.

5. To avoid disturbing others, the machine should only

be used during the daytime.

6. Always wear close-fitting work clothes, hard-wearing

work gloves, ear defenders and non-slip boots with

steel toecaps.

7. Take a 30-minute break every 2 working hours.

Specification

Engine

Powerline TG595, 173cc

Working width

Max 56 cm

Working height

3,5 – 6,5 cm

Trimmer line

4 mm

Transmission

Push

Wheels

14”

Adjustable handle

Yes

Weight

31 Kg

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Texas PRO TRIM 560 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info