Bedienungsanleitung Texas Rider 6100ES (Seite 12 von 23) (Deutsch, Englisch, Dänisch)

636646

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

Maintenance and storage

The engine shall be stopped when carrying out

maintenance and cleaning operations, when

changing tools and when being transported by

means other than under its own power.

Check regularly that all bolts and nuts are

tightened. Retighten if necessary.

The engine must be completely cooled before

storing indoors or covered.

If the machine unused for a period of time,

please refer to the instructions in this manual.

Maintain or replace safety and instruction

labels, as necessary.

Only use orginal spare parts or accessories. If

not orginal parts or accessories is used, the

liablility is no longer applied.

Miscellaneous

The motor is not pre-filled with oil.

Always before start check the engine oil level.

Factory-fitted control devices, such as the

handle-mounted clutch cable, must not be

removed or exposed.

Only drain the fuel tank outdoors. Gasoline is

extremely flammable and the fumes are

explosive.

Ensure that the machine is properly secured

when transported on a flatbed etc.

Waste electrical products must not be

disposed of with the household waste. This

tool should be taken to your local recycling

centre for safe treatment.

The lawn rider is manufactured according to the latest

safety requirements. These include a blade brake that

stops the motor and blade in 3 seconds when the blade

brake. Every precaution is only effective when it is

followed exactly. Use the following description when

you mount your lawnmower.

Identification of the parts

See Illustration 1

Notice: the illustrations may vary from your present

model

A. Choke.

B. Gear.

C. Ignition key - Electric starter.

D. Water nozzle.

E. Height adjustment.(cutting deck)

F. Brake/clutch pedal

G. Parking brake.

H. Coupling rod. (cutting deck)

I. Safety switch.

J. Grass collector (only model 6100E)

Mounting

Unpacking: Illustration M1

Remove the mower from the box by pulling the machine

out form the side. The box contains:

1 pcs. Mower

1 pcs. Steering wheel.

1 pcs Coupling rod

1 pcs Grass collector (only model 6100E)

Assembly instructions (illustration 2+5)

1. Mount the coupling rod for the cutting deck as

shown.

2. Mount the steering wheel to steer axle, fasten

as shown.

3. Mount the grasscollector and attach to mower

as shown.

4. Open the seat flap, fit and install the seat as

shown.

5. It is recommended to mount the safety bolt

and pin as shown in illustration 5. This fix the

cover to the chassis of the machine.

Technical installation

6. Add oil on the engine (cf. engine manual)

7. Cennect the wire to the battery (illustration 2.6)

8. Ensure that the safety switch under seat and

on rear plate (only model 6100E) is activated.

Tyre pressure

Check tyre pressure before start.

The correct tyre pressure is 1.8 bar on front wheels and

1.3 bar on rear wheels

Important: When tyre pressure is too low the valves

and the inner tube may be damaged.

Battery

Charge the battery before use

Before the electric start function is used, the battery

must be charged for min 5 hours. Put the charger plug

into the hole in the battery (open the yellow cover first)

and connect the charger to a power supply. See

illustration 4.

Charging during the season

The battery is charged a little during use, buy it will

likely be necessary to charge the battery a couple of

times during the season - depending if the number of

start/stops of the engine. Put it for charging for around 5

hours.

Storage of battery

The battery must always be stored dry and warm during

the winter. Never expose it for low temperatures.

Charge the battery completely before storing and then

place the lawn mower in a place where it is not exposed

to frost. Alternatively cover the battery with a thick

carpet or similar, If the mower is in a shed/garage

where there may be cold.

Charge the battery 1-2 times during the winter (at least

every 3

month) to make sure the battery keeps it full

capacity.

Incorrect storage can damage the battery, and is not

covered by warranty.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Texas Rider 6100ES Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info