Bedienungsanleitung Texas TX602TG (Seite 10 von 44) (Deutsch, Englisch, Dänisch, Französisch, Polnisch)

636690

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Never attempt to make any adjustments, while the

engine is running.

Use extreme caution when reversing or pulling the

machine backwards

Never operate the engine indoor or in areas with low

ventilation. The exhaustion from the engine contains

carbon monoxide. Failure to observe could result in

permanent injury or death.

Gasoline safety

Use extreme care in handling gasoline. Gasoline is

extremely flammable and the fumes are explosive.

Serious personal injury can occur, when gasoline is

spilled on yourself or your clothes. Rinse your skin and

change clothes immediately!

Use only an approved gasoline container. Do not use

soft drink bottle or similar!

Extinguish all cigarettes, cigars, pipes and other sources

of ignition.

Never refuel your machine indoors.

Let the engine cool down before refilling

Never fill the fuel tank to more than 2.5 cm below bottom

of filler in order to provide space for fuel to expansion.

After refueling, ensure that the cap tighten securely.

Never use the lock-function on the gasoline gun, when

refueling.

Do not smoke while refueling.

Never refuel inside a building or where gasoline fumes

may get in contact with an ignition source.

Keep gasoline and engine away from appliance, pilot

lights, barbecues, electric appliances, power tools, etc.

If the fuel tank has to be drained, this shall be done

outdoors

Maintenance and storage

The engine shall be stopped when carrying out

maintenance and cleaning operations, when changing

tools and when being transported by means other than

under its own power.

Check regularly that all bolts and nuts are tightened.

Retighten if necessary.

The engine must be completely cooled before storing

indoors or covered.

If the machine unused for a period of time, please refer

to the instructions in this manual.

Maintain or replace safety and instruction labels, as

necessary.

Only use original spare parts or accessories. If not

original parts or accessories is used, the liability is no

longer applied.

Replace faulty silencers.

Miscellaneous

The gears are delivered pre-greased. However, always

ensure they are well greased before each use.

The motor is not pre-filled with oil.

Factory-fitted control devices, such as the handle-

mounted clutch cable, must not be removed or exposed.

Only drain the fuel tank outdoors. Gasoline is extremely

flammable and the fumes are explosive.

Ensure that the machine is properly secured when

transported on a flatbed etc.

Reduce the throttle during engine shutdown and close

the fuel valve.

Assembly TX601 and TX602

Please follow the steps in figure:

(Actual model may vary from the illustration shown.)

1. Box content

A. Extension blades

B. Tiller with cables and support wheels

C. Blades Outer

D. Side guards

E. Handlebar (TX602 Only)

F. Depth skid

G. Bumper

H. Mounting bracket for handlebar (TX602 only)

I. Lower handle x2 (TX601 Only)

J. Handlebar (TX601 Only)

2. Only for model TX 601

Fit the lower handle section. Use the supplied mountings

and bolts.

Fit the handle. Use the supplied assembly kit as shown.

3. Only for model TX 602

Fit the handle into the bracket (1-H) fasten with hand

wheel.

NB: Ensure the bolt goes through the spring.

4. Mount clutch handle as shown on the picture.

5. Mount the side guards using the bolts and nuts supplied.

Note the side guard has to go under the body.

6. Attach the bumper using the bolts and nuts supplied.

7. Mount the blades using the cotter bolts and pins.

Fill the motor with oil.

See changing the oil section for more details.

Clothing

When using the machine, wear close-fitting work clothes,

hard-wearing work gloves, ear defenders and non-slip boots

with steel toecaps.

Operating the tiller

Ensure the machine is placed on a level surface

with the support wheels lowered prior to start.

Remove all foreign objects from the work area

before using the machine. Stones, glass, branches

and similar items may damage the tiller. Also check

the bolts on the tiller are tightened.

Start the motor as per the instructions below. Stand

clear of the machine’s moving parts.

Never attempt to move the machine in any way

other than intended for normal use while the motor

is running.

The tiller is designed for use in vegetable gardens and

flowerbeds. Ensure that you are familiar with these

instructions before operating the machine, in particular the

motor start and stop procedures.

Fig 10B: To use the black handle the control stick must first

be activated. By tilting the control stick to the right or left side

and then activate the black handle lever, the tiller will move

forward or backwards.

Pay attention while reversing. It is important that the area is

cleared, for any obstacle before reversing. Never reverse the

tiller against a wall, tree or any other fixed obstacle.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Texas TX602TG Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info