Küchen-Chef – Digital oven and meat thermometer
Küchen-Chef – Digital oven and meat thermometer
1110
Temperature display ➜ Check the position of the sensor in the meat
is too high
If your device fails to work despite these measures contact the supplier from whom you
purchased it.
7. Waste disposal
This product has been manufactured using high-grade materials and components which can
be recycled and reused.
Never dispose of empty batteries and rechargeable batteries in household
waste.
As a consumer, you are legally required to take them to your retail store or to
appropriate collection sites depending on national or local regulations in order
to protect the environment.
The symbols for the heavy metals contained are:
Cd=cadmium, Hg=mercury, Pb=lead
This instrument is labelled in accordance with the EU Waste Electrical and Elec-
tronic Equipment Directive (WEEE).
Please do not dispose of this instrument in household waste. The user is obligat-
ed to take end-of-life devices to a designated collection point for the disposal
of electrical and electronic equipment, in order to ensure environmentally-com-
patible disposal.
8. Specifications
Measuring range Oven: 0°C… +300°C (+32°F… +572°F) °C/°F-reversible
Measuring range Meat: 0 °C…+300°C (+32 °F... +572 °F) °C/°F-reversible
Measuring range Alarm: +30 °C…+300°C (+86 °F... +572 °F) °C/°F-reversible
Resolution: 1°C/1°F
Cable: appr. 1 m, heat resistant up to 380 °C
Power consumption: 1 x 1.5 V AAA battery (included)
Housing dimension: 72 x 24 x 87 mm
Weight: 112 g (instrument only)
TFA Dostmann GmbH & Co.KG, Zum Ottersberg 12, D-97877 Wertheim.FA Dostmann GmbH & Co.KG, Zum
Ottersberg 12, D-97877 Wertheim.
No part of this manual may be reproduced without written consent of TFA Dostmann. The technical data
are correct at the time of going to print and may change without prior notice.
www.tfa-dostmann.de 05/13
4.4 Setting of the timer and stopwatch
Stopwatch
•
Press the OVEN/TIMER button.
•
Timer and 0:00oo appear on the above display.
•
Press the START/STOP button and the count up process starts.
•
▲ flashes on the display.
•
With the START/STOP button you can stop and restart the counting.
•
▲ stays /flashes on the display.
•
Press the STD and MIN button at the same time to reset the timer.
•
▲ disappears on the display.
Count Down Timer
•
Press the MIN or STD button to adjust the minutes (max. 59 minutes) or the hours (max. 9
hours).
•
▼ appears on the display.
•
Press the START/STOP button.
•
▼ flashes and the process starts.
•
With the START/STOP button you can stop (▼ stays) and restart (▼ flashes) the counting.
•
After the interval, the display flashes and three short alarm signals will sound each second
(until 20 seconds) will sound.
•
▼ and ▲ flash simultaneously on the display and the seconds are counted up.
•
Press any button to stop the alarm.
•
The seconds still are counted up and ▼ and ▲ still flash.
•
Press the START/STOP button to stop the counting.
•
Press the MIN and STD button at the same time to reset the timer.
•
▼ and ▲ disappear and 00:00oo appears.
5. Care and maintenance
•
Clean the instrument and the probe with a soft damp cloth. Do not use solvents or scour-
ing agents. Protect from moisture.
•
Should water or steam enter the socket, it could affect contact with the probe. Dry the
plug connector with a cloth before you connect it to your instrument.
•
Turn off the instrument after use.
•
Remove the battery if you do not use the instrument for a longer period of time.
•
Keep the instrument in a dry place.
5.1 Battery replacement
•
Replace the battery when the display becomes weak or the alarm level declines.
6. Troubleshooting
Problems Solutions
No display ➜ Switch on the instrument
➜ Check battery polarity
➜ Change battery
Incorrect display ➜ Change battery
➜ Check the contact of the plug to the socket, optionally dry
both parts
TFA_No. 14.1503 Anleitung_05/13 17.06.2013 17:15 Uhr Seite 6
