Bedienungsanleitung TFA 35.1044.IT Linear (Seite 3 von 15) (Englisch)

539601

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

batteries in the Weather Station” above). Once the batteries are in

place, all segments of the LCD will light up briefly and a short signal

tone will sound. Following the indoor temperature/humidity and the

time as 0:00 will be displayed. If these information are not displayed

on the LCD after 60 seconds, remove the batteries and wait for at

least 60 seconds before reinserting them. Once the indoor data is

displayed user may proceed to the next step.

3. After the batteries are inserted, the Weather station will start

receiving data signal from the transmitter. The outdoor temperature

data should then be displayed on the Weather station. If this does

not happen after 2 minutes, the batteries will need to be removed

from both units and reset from step 1.

4. In order to ensure sufficient 868 MHz transmission however, the

distance between the Weather Station and the transmitter should

not be more than 100 meters (see notes on “Positioning” and “868

MHz Reception”).

Note:

In the event of changing batteries of the units, ensure the batteries do not

spring free from the contacts. Always wait at least 1 minute after removing

the batteries before reinserting, otherwise start up and transmission

problems may occur.

WHEN MORE THAN ONE TRANSMITTER IS USED

1. User shall remove all the batteries from the Weather Station and

transmitters, and wait 60 seconds.

2. Insert the batteries in the first transmitter.

3. Within 2 minutes of powering up the first transmitter, insert the

batteries in the Weather Station. Once the batteries are in place, all

segments of the LCD will light up briefly and a short signal tine will

sound. Following the indoor temperature/humidity and the time as

0:00 will be displayed. If these information are not displayed on the

LCD after 60 seconds, remove the batteries from both units and wait

for at least 60 seconds before reinserting them.

4. The outdoor temperature data from the first transmitter (channel 1)

should then be displayed on the Weather Station. Also, the signal

reception icon will be displayed. If this does not happen after 2

minutes, the batteries will need to be removed from both units and

reset from step 1.

5. Insert the batteries in the second transmitter as soon as the outdoor

temperature readings from the first transmitter are displayed on the

Weather Station.

Note :

User shall insert the batteries into the second transmitter

within 45 seconds after the Weather Station displays the information

of the first transmitter.

6. The outdoor temperature from the second transmitter and the

"channel 2" icon should then be displayed on the Weather Station. If

this does not happen after 2 minutes, the batteries will need to be

removed from all the units and reset from step 1.

7. Insert the batteries in the third transmitter as soon as the "channel 2"

icon and outdoor data are displayed on the Weather Station. Then

within 2 minutes, the channel 3 outdoor data from the third

transmitter will be displayed and the channel icon will shift back to

"1" once the third transmitter is successfully received. If this is not

happen, user shall restart the setting up from step 1.

Note :

User shall insert the batteries into the third transmitter within

45 seconds after the Weather Station displays the information of the

first transmitter. Or immediately after reception of the second

transmitter is finished.

8. In order to ensure sufficient 868 MHz transmission however, the

distance between the Weather Station and the transmitter should

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TFA 35.1044.IT Linear Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von TFA 35.1044.IT Linear

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info