466142
15
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
33
POSITIONING THE THERMO-HYGRO TRANSMITTER
The thermo-hygro transmitter can be placed onto any flat surface or wall mount using the
bracket which doubles as a stand or wall mount base.
To wall mount:
1. Secure the bracket onto a desired wall
using the screws and plastic anchors.
2. Clip the transmitter onto the bracket.
Note:
Before permanently fixing the remote
temperature/humidity sensor wall base, pace all
units in the desired locations to check that the
outdoor temperature and humidity readings are
receivable. In event that the signal is not
received, relocate the remote
temperature/humidity sensor or move them
slightly as this may help the signal reception
CARE AND MAINTENANCE
Clean the instrument and the transmitter with a soft damp cloth. Do not use solvents or
scouring agents. Protect from moisture.
Remove the batteries if you do not use the product for a lengthy period.
MALFUNCTION
Problems Troubleshooting
No indication on the
weather station
Ensure batteries polarity are correct
Change batteries
No transmitter reception
Display "---"
Check batteries of external transmitter (do not use
rechargeable batteries!)
Restart the transmitter and weather station as per the
manual
Choose another place for the transmitter and/or the
weather station
Reduce the distance between the transmitter and the
weather station
Check if there is any source of interference
No DCF reception
Time reception setting “ON”
Choose another place for the weather station
Manual time setting
Wait for attempted reception during the night
Incorrect display
Change batteries
WASTE DISPOSAL
This product has been manufactured using high-grade materials and components which can
be recycled and reused.
Never throw flat batteries and rechargeable batteries in household waste.
As a consumer, you are legally required to take them to your retail store or to
appropriate collection sites according to national or local regulations in order
to protect the environment.
The symbols for the heavy metals contained are: Cd=cadmium, Hg=mercury,
Pb=lead
Table stand/wall
mount bracket
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für TFA 35.1045.IT - Laluna Funk wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von TFA 35.1045.IT - Laluna Funk

TFA 35.1045.IT - Laluna Funk Bedienungsanleitung - Deutsch - 18 seiten

TFA 35.1045.IT - Laluna Funk Bedienungsanleitung - Holländisch - 16 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info