576798
8
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
SPRING – Wireless weather station
SPRING – Wireless weather station
14 15
Caution!
ƽ
Risk of injury:
Keep these instruments and the batteries out of the reach of children.
Batteries must not be thrown into a fire, short-circuited, taken apart or recharged. Risk of
explosion!
Batteries contain harmful acids. Low batteries should be changed as soon as possible to prevent
damage caused by leaking. Never use a combination of old and new batteries together, nor bat-
teries of different types. Wear chemical-resistant protective gloves and safety glasses when
handling leaking batteries.
ƽ
Important information on product safety!
Do not place your product near extreme temperatures, vibrations or shocks.
Protect it from moisture.
The outdoor transmitter is protected against splash water, but is not watertight. Choose a shady
and dry position for the transmitter.
5. Elements
Wireless weather station (basic station)
A: Display (Fig. 1):
Left display
A 1: Outdoor temperature and humidity
A 2: Tendency indicators
A 3: Symbol for temperature alarm
A 4: Symbol for the outdoor transmitter
Middle display
A 5: Weather symbols
A 6: Tendency indicator
A 7: Time, weekday and date
A 8: DCF-reception symbol
A 9: Alarm / snooze / DST symbol
Right display
A 10: Indoor temperature and humidity
A 11: Tendency indicators
A 12: Symbol for temperature alarm
B: Buttons (Fig. 1+2):
Front
B 1: ALERTS button
B 2: ALARM button
Top
B 3: button
B 4: TIME SET button
B 5: SNOOZE/LIGHT (HI – LOW - OFF) button
B 6: HEAT/DEW button
B 7: button
C: Housing (Fig. 3):
C 1: Wall mount holes
C 2: Battery compartment
C 3: Stand (fold out)
C 4: Connection mains adapter
C 5: Cable slot
D: Outdoor transmitter (Fig. 4):
Housing
Front:
D 1: LED control lamp
D 2: Battery compartment
D 3: TX button inside of the battery compartment
Backside:
D 4: Wall mount hole
6. Getting started
Place the basic station and the transmitter on a desk with a distance of approximately 1.5 meter.
Avoid getting close to possible interference sources (electronic devices and radio installations).
Remove the protective foil from the display of the basic station.
Connect the basic station to the attached power adapter. Insert the adapter into the jack at the
basic station and connect the power adapter to a wall socket. Important! Make sure that your
household voltage is 230V! Otherwise your clock may be damaged.
The device will alert you with a beep and all LCD segments will be displayed for a short
moment.
6.1 Inserting of the batteries in the outdoor transmitter / Reception of the outdoor values
Slide down the battery compartment lid of the outdoor transmitter.
Insert two new batteries 1,5 V AA. Make sure the polarities are correct.
After the batteries are inserted, the outdoor values will be transmitted to the basic station.
As soon as the basic station receives the outdoor values, the values are permanently shown.
If the reception of the outdoor values fails, “- -” appears on the display. Check the batteries and
try it again. Check if there is any source of interference.
You can also start the outdoor transmitter search manually later on (for example when the out-
door transmitter is lost or the batteries are changed).
Hold the HEAT/DEW button on the basic station for three seconds.
“---” appears on the display.
Press the TX button in the battery compartment of the outdoor transmitter.
The device will alert you with a beep and the basic station receives the values from the outdoor
transmitter.
After successful installation close the battery compartment of the outdoor transmitter carefully.
6.2 Reception of the DCF reception signal
After the reception of outdoor values, the clock is now trying to receive the reception signal
and the DCF reception symbol will be flashing.
When the time code is received successfully after 3-10 minutes, the radio-controlled time and
the DCF symbol are displayed steadily in the LCD.
The DCF reception always takes place at 1:00, 2:00 and 2:00 o'clock in the morning. If the recep-
tion is not successfully received at 3:00 clock, it shall be held further attempts until 5:00 clock.
You can also activate the DCF reception manually.
Press the TIME SET button.
The DCF reception symbol will be flashing.
There are three different reception symbols:
flashing – reception is active
stays – reception is good
No symbol – no reception
By default, the DCF reception is activated and after successful reception of the DCF signal no
manual adjustment is necessary.
TFA_No. 35.1129_Anleit_12_13 27.12.2013 11:24 Uhr Seite 8
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für TFA 35.1129 - Spring wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info