Minutes (flashing)
RADIO CON
WITH
AIR QUAL
Instructions manua
Cat. No. 60.25
Thank you for choosing this instrument from
Our "Big Air Monitor" shows yo
is. It allows y
ensure a healthy indoor climate at home
Headaches, dizziness and fatigue are often due to an excessi
concentration of volatile organic com
sources of emis
The air quality sensor detects m
which can be harmful to people, for exam
carbon monoxide, m
The device displays the air quality w
invisible dangers!
Important!
Please keep in mind that after setting up the instrument a reliable
value is displayed only after about 5 days. The se
adjust itself to the actual conditions at the installati
find a reference level.
Until this process is complete, the instrument initially s
higher values.
BEFORE YOU USE IT
Please make sure to read the instruction manual carefully
This inform
device, to learn all of its functions and parts, to find out im
details about its first use and how to operate it
the event of faults.
Following and respecting the instructions in you
damage to your instrum
from defects due to incorrect use.
We shall not be liable for any damage occurr
following these instructions. Likewise, we take no respon
for any incorrect readings and for any con
result from them.
Please take particular note of the safety a
Please keep this instruction manual for
SCOPE OF DELIVERY:
• Radio controlled alarm clock
• Instruction manual
FIELD OF OPER
YOUR NEW INSTRUMENT
• Radio-controlled clock w
setting option
• Alarm with snooze
• Date display
• Air quality m
• Acoustic and visual alarm function
• Indoor temperature and hum
• Backlight
FOR YOUR S
•
The product is exclusively intended for the field of application
described above. The product should only b
described within these instructions.
• Unauthorised repairs, modifications or changes t
are prohibited.
•
This product is not to be used for m
information; it is only intended for hom
Caution!
Risk of injury:
•
Keep this instrument and the batteries out of the reach of
children.
• Batteries must not be thrown into the fire, short-circuited, tak
apart or recharged. Risk of explosion!
• Batteries contain harmful acids. Low batteries should be
changed as soon as possible to prevent dam
leaking battery. Never use a combi
batteries together or batteries of different types.
chemical-resistant protective gloves and glasses w
handling leaking batteries.
! Important information on product safety!
• Do not place your product near extreme tem
vibrations or shocks.
• Protect it from moisture.
ELEMENT
The air qua
SETTING UP:
1. Open the battery compartment at the back of the de
two new batteries 1,5V C, IE
are correct. Close the battery com
2. When the batteries are inserted, all the segm
will light up briefly and a “beep” will sound.
3. The device will now start receiving the DCF tim
approximate 3 to 10 minutes, the DCF time w
4. If there is no DCF reception possible after 10
have also the possibility to set the time ma
settings).
RADIO-CONT
The time base for the radio-controlled time
operated by the Physikalisc
Braunschweig. It has a tim
million years. The tim
Frankfurt via frequency signal DCF-77 (77.5 kHz
transmitting range of approximately
clock receives this signal, converts it to show t
Changeover from summe
of the reception depends mai
there should be no reception problems
around Frankfurt.
The DCF reception alway
reception is not successful received at 03:00 am
be held at 02:00 am
Please take note of the following:
• The recommended distance to any interfering sources like
computer monitors or TV sets is at least 1.5 - 2 m
• Inside Ferro-concrete rooms (baseme
received signal is naturally w
please place the unit close to a window to impro
reception.
• During nighttime, the atmospheric interference is usually l
severe and reception is possible in m
cases. A single daily
reception is adequate to keep the accuracy deviation under 1
second.
BUTTON F
The device has 5 easy-to-use buttons:
By each button press the backlight w
seconds.
LCD SCREEN
• Press the SET button in normal m
about 6 seconds.
• Press the MODE button in normal m
Equivalent CO
2
ppm display, seconds and alarm display.
AIR QUALITY INDIC
* The air quality value shown, after sensor conditioning, m
250 ppm.
The air quality sensor detects more than 5,00
the air.
The measured values are attributed to CO
2
- equivalent units of ppm
to maintain compatibility with CO
2
ventilation standards.
Note:
An Equivalent CO
2
ppm value will after setup.
The instrument initially
to the actual conditions at the installation site
level. A reliable value is displayed only
the same place.
AIR QUALITY SYMBOL
The air quality symbo
The bar graph measures from GOOD (green) until
printed on the edge of the housing.
Levels Equivalent CO
2
ppm
GOOD (level 1) 450 – 600ppm
Level 2 650 – 800ppm
Level 3 850 – 1000ppm
Level 4 1050 – 1200ppm
Level 5 1250 – 1500ppm
Level 6 1550 – 1800ppm
Level 7 1850 – 2100ppm
Level 8 2150 – 2400ppm
BAD (level 9) ≥ 2450ppm
MANUAL SETT
The following manual settings can be done in the setting m
• Time zone setting
• DCF ON/OFF setting
• 12/24 hour time setting
•
Manual time setting
• Calendar setting
•
Snooze function setting
• ºC / ºF temperature display setting
• Air quality alert setting
Press and hold the SET button for about 3 second to enter the setting
mode:
TIME ZONE
The time zone default is "0h" . To set a different tim
1. 0h starts flashing.
2. Use the +button to set the time zone. The range runs from
1, 2…until -12, and then from 12, 11, 10 back to 0.
3. Confirm with the SET button and enter the Time reception
On/Off setting.
TIME RECEPT
In area where is no DCF reception is possible, y
possibility to deactivate the DCF reception m
will then work as a norma
1. The symbol “ON” and the reception symbol w
the LCD.
2. Use the + button to deactivate (OFF) the tim
function if necessary.
3. Confirm with the SET button and enter the 12/24 hour time
display setting.
Note:
If the time reception function is deactivated (OFF) m
will not attempt any reception of the radio-controlled tim
as long as the time reception will be activated (ON) again. I
reception is deactivated (OFF) the DCF sym
12/24 HOU
1. “12hr” or “24hr” flashes in the LCD (default is 24hr).
2. Press the + button to select the “12hr” or “24h
3. Confirm with the SET button and enter the Manual time
setting.
Note:
When 24h time display is selected, the calendar format w
and month display. When 12h tim
format will be month and date display.
MANUAL TIME SET
In case the device is not able to attempt the radio-controlled tim
(disturbances, transmitting distance, etc.), the time can be m
set. The clock will then work
To set the clock:
1. The hour digits will be flashing in the display.
2. Use the + button to adjust the hours. Press the SEbutton to
go to the minute setting.
3. The minute will be flashing. Press the + button to just the
minutes.
4. Confirm with the SET button and enter the Calendar setting .
Flashing
Flashing
Flashing
S
ALARM button
+ button
MODE
button
SNOOZE button
Flashing
Function button
Air quality indicator
Bar graph
Equivalent CO
2
ppm (parts per
million)*
Low battery icon
Alarm time /
Equivalent CO
2
ppm / seconds
display
Indoor relative
humidity % RH
Alarm icon
DCF Tow
Air quality indicator
