1514
HOLOclock - Radio controlled clock with 3-D effect
╞
8. Care and maintenance
•
Clean your instrument with a soft damp cloth. Do not use solvents or scouring agents.
•
Attention: Please remove the batteries if you pull the plug out of the socket for a longer time or
if you want to disable the instrument permanently.
•
Keep the instrument in a dry place.
8.1 Battery replacement
•
Please change the back-up batteries every 3 years.
•
Open the battery compartment and insert two new batteries 1,5 V AAA. Ensure that the battery
polarities are correct.
•
Attention: When replacing batteries, only use new batteries.
•
Close the battery compartment again.
9. Troubleshooting
Problems Solution
No display ➜ Control the power adapter
➜ Press the LIGHT button
No DCF reception ➜ Activate the DCF reception (see Manual settings)
➜ Press the WAVE button to activate the reception
➜ Choose another place for your product
➜ Wait for attempted reception during the night
➜ Check if there is any source of interference
➜ Restart the device according to the manual
➜ Manual clock setting
If your device fails to work despite these measures contact the supplier from whom you purchased it.
10. Waste disposal
This product has been manufactured using high-grade materials and components which can be re-
cycled and reused.
Never dispose of empty batteries and rechargeable batteries in household waste.
As a consumer, you are legally required to take them to your retail store or to an
appropriate collection site depending on national or local regulations in order to pro-
tect the environment.
The symbols for the heavy metals contained are:
Cd=cadmium, Hg=mercury, Pb=lead
This instrument is labeled in accordance with the EU Waste Electrical and Electronic
Equipment Directive (WEEE).
Please do not dispose of this instrument in household waste. The user is obligated to
take end-of-life devices to a designated collection point for the disposal of electrical
and electronic equipment, in order to ensure environmentally-compatible disposal.
HOLOclock - Radio controlled clock with 3-D effect
╞
11. Specifications
Power consumption: Batteries 2 x 1,5 V AAA (included) and AC/DC power adaptor (included)
Temperature range: -5°…+50°C / +23°…+122°F
Indication LL / HH: Measurement is outside the measuring range
Housing dimension: 165 x 84 x 35 mm
Weight: 162 g (instrument only)
3-D effect protected by a patent of 3Daround GmbH
TFA Dostmann GmbH & Co.KG, Zum Ottersberg 12, D-97877 Wertheim.
No part of this manual may be reproduced without written consent of TFA Dostmann. The technical data are correct at the
time of going to print and may change without prior notice.
DECLARATION OF CONFORMITY
Herewith we declare, that this wireless transmission device does comply with the essentials requirements of R&TTE Directive
1999/5/EC.
A copy of the signed and dated Declaration of Conformity is available on request via info@tfa-dostmann.de.
www.tfa-dostmann.de 10/2013
TFA_No. 60.5009_Anleitung 09.10.2013 14:11 Uhr Seite 8
