Bedienungsanleitung Thane X5 VAC (Seite 11 von 16) (Englisch)

550723

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

E. HOW TO USE OPTIONAL ACCESSORIES (continued)

INSTRUCTIONS FOR USE

CHARGING BATTERY PACK

Before charging the Battery Pack, always check that the voltage of the electrical outlet corresponds to the voltage on

the rating plate of the Battery Charger Unit.

D. HOW TO USE THE X5 VAC

WARNING

•YourX5VACcontains3LithiumIonBatteriessealedinsidetheBatteryPack.

•TochargetheBatteryPack,usetheBatteryChargersupplied.TheBatteryPackcanbeconnected

 totheMainUnit(see1).Alternatively,theBatteryPackmaybedisconnectedfromtheMainUnitand

 chargedseparately(see2).

Note: If you have obtained a spare Battery Pack, this can be charged separately without being

connected to the Main Unit.

•BeforechargingtheBatteryPackattachedtotheMainUnit,ensurethePowerSwitchisOFF.

•Initially,BatteryPackmustbechargeduninterruptedfor7hours.Whenfullycharged,theX5VACwill

 operateforupto15minutes.RechargingtheBatteryPackwilltakeabout7hours.

•TochargetheBatteryPack,connecttheChargerUnittotheelectricaloutletandplugtheCharger

Cord into the Charger Socket located on the Battery Pack.

•TheChargingLightontheBatteryPackwillturnONtoindicatethattheBatteryPackischarging.Once

fully charged, the Charging Light will turn off.

Note: While charging, the Battery Pack and the Charger Unit may become warm to the touch.

This is normal and is no cause for concern.

•OncetheBatteryPackischarged,unplugtheChargerUnitfromboththeChargerPortoftheX5VAC

and from the electrical outlet.

Tip:Toprolongbatterylife,completelydischargeandrechargetheBatteryPackevery1–2months.

Do not charge or store the Battery Pack at temperatures below 4º C/39.2°F & above 40º C/ 104°F.

Do not place the Battery Pack in direct sunlight.

CAUTION

Using the Liquid Lifter with Window Cleaner

The primary use of the Window Cleaner is for cleaning and drying of non-porous surfaces such as windows and mirrors. In addition,

the Window Cleaner can also be used for cleaning and drying of glass tops.

Thereare2alternativewaysofconnectingtheWindowCleaner:

Option1:ConnecttheWindowCleanerdirectlytotheLiquidLifterinletpipe.HoldtheMainUnitinbothhandswhileusingit.Itis

recommended to connect the Window Cleaner this way when cleaning horizontal surfaces such as glass or granite tops.

Note:EnsurethattheWindowCleaneriscorrectlyalignedtotheLiquidLifter(see1).

Option2:ConnecttheFlexibleHosetotheinletpipeoftheLiquidLifterandconnectthe

WindowCleanertotheotherendoftheFlexibleHose(see2).

Hold the Window Cleaner with one hand and the handle of the Main Unit with the other hand

while using it.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thane X5 VAC Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info