Bedienungsanleitung The Bastard Buddy 2022 (Seite 6 von 21) (Deutsch, Englisch, Holländisch, Französisch)

806475

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

THE BASTARD BUDDY - BB615

Before use of the burner always perform a leak check on the

product, gas cylinder, connections and tube. Perform these steps:

Leak testing:

Make sure that the valve is in correct alignment

with the tube and gas connection.

Make sure that the hose has no cracking

and splitting before each use.

IMPORTANT: if you can not stop a gas leak, turn o the

gas tank valve and call your local gas tank dealer.

Perform this leak away from open ames and

sparks, do not smoke during this test!

1. Make 2-3 uid ounces of leak detecting solution

by mixing one part soap with 3 parts water.

2. Make sure that all the control knobs are in OFF position.

3. Connect the regulator to the gas tank.

4. After securing the connections completely open the gas tank.

5. Brush the following parts with soapy water:

•gas tank valve

•regulator

•hose and hose connections

•valves

•welds or seams on the gas tank

6. If there is a leak, re-tighten all the gas connections

and repeat procedure (step 2 to step6). After

the leak test, turn o the gas tank valve.

7. Remove the control knobs.

8. If the leak continues, do not try to x the problem

yourself. Please consult with your LPG supplier.

If there is no leak you are good to go.

3.1. IGNITION OF THE STOVE

1. Keep a lighted match or a lighter above the burner.

2. Open the middle control valve to release

and light the inner burner.

3. If the burner has not lit, turn o the control

valve, waits 5 minutes and repeat step1.

4. When the burner is alight, open the other

control valve to light other burners.

5. To turn the stove o: turn the cylinder valve or regulator switch

to the OFF position and then turn all control valves o.

WARNING

Never put your head or your body above the turned-on stove

when you light it or when cooking. This is a very dangerous

and may lead to re, burns, serious injuries or death.

3. USE OF THE STOVE 3.2. USE WHEN COOKING

1. Put food or liquids in a container (or kitchenware).

2. Put the kitchenware in the middle of the stove.

3. Turn the control valve to adjust the heat.

4. Turn o the gas supply in the event of gas

leak or when the ame dies.

5. The size of the cooking vessels to be used is from 20cm to 35cm.

6. When handling particularly hot components, it

recommends to use the protective gloves.

WARNING

Never move a hot or turned-on stove. Switch the stove o and

wait more than 5 minutes before moving it. To move a hot or

turned-on stove may lead to re, burns, serious injuries or death.

Never use a kitchenware whose diameter is bigger than 40cm.

Never group together many stoves. Never use any stove to heat empty

or dry pans. Never use any heat dispatcher from another supplier. Such

a use of the stove may lead to re, burns, serious injuries or death.

Never use a kitchenware format which is not right for the stove

- especially the pan support (convex or concave bottom, some

enamelled kitchwares, etc). The use of a unsuitable kitchware

may lead to the instability of the utensil or the stove. They could

fall over rand lead to re, burn, serious injuries or death.

The part sealed by the manufacture or his

agent cannot be altered by the users.

3.3. TURNING OFF THE STOVE

1. Close the control valves when done with cooking.

2. When the last ame is switched o, wait 5

minutes in order to cool down the stove.

3. Check that the burners are switched o

before unfastening the gas rell.

4. Remove the valve of the gas stove.

5. Get the whole stove away from ignition sources and

then unscrew the gas cylinder. Place all the stove away

from ignition sources and remove the gas cylinder.

During unscrewing you may have a small amount of gas escapes.

If the gas bottle is empty, obey laws on recycling and waste treatment.

WARNING

Always separate the stove from the propane tank before storing. If you

do not remove the gas cylinder before storage it may leak gas and

cause a re, burns, serious injury or death. Always store gas cylinders

in a well ventilated area away from any potential source of heat or

ignition, including: water heater, stove or furnace pilot lights, or in a

place where the temperature exceeds 49 ° C. The storage of cylinders

near sources of heat or ignition when the temperature exceeds 49 °C

can cause an explosion and result in re, burns, severe injury or death.

9 10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

The Bastard Buddy 2022 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info