69
5.10 Forced Transmitter Call
The synchronisation of the time switch is effected after the initial setting-up, then
daily between 1.58 and 3.13.
A radio synchronisation can be called up manually during the day
(transmitter call).
Start of the Transmitter Call
1. Press Dat Button for approx. 3 secs.
2. then release
The timeswitch synchronises itself on the DCF 77 signal.
In the LCD display can be seen:
The RC symbol flashes only during a DCF 77 synchronisation!
If the time switch has synchronised itself, a program review takes place.
The channels take on, afterwards, the specified switching positions, from the indi-
vidual program.
The RC symbol is permanently in the LCD display.
Example: The time switch has synchronised itself on 19.5.2000 at 9.25.
2)
3)
6.0 Manual intervention in the program
6.1 Automatic operation (standard setting)
The channel C take in the switching condition provided the stored time program.
6.2 Permanent ON
The channel C can be manually switched in each menu to permanently ON. A
permanent switching has highest priority. The channel remains in the perma-
nently ON switching position until manually cancelled.
The status display in the LCD (p / o) is not adjusted.
6.3 Permanently OFF
The channel C can be manually switched in each menu to permanently OFF. A
permanent switching has highest priority. The channel remains in the perma-
nently OFF switching position until manually cancelled.
The status display in the LCD (p / o) is not adjusted.
Time limited permanent switchings ON/OFF (see Chapter 8.3)
