91
14.0 Glossary
What does automatic operation (Auto) mean?
The cursor is below Auto. Current time is displayed.
The switching sequence of the time switch is determined by the stored swit-
ching times. (Note: permanent switchng has priority see Chapters 6.2 and
6.3).
What is automatic return?
When in the interrogation or programming mode, if no button is used for a
long time, the display reverts automatically, after approx. 40 secs. to auto-
matic operation.The product then takes up the switching status specified by
the program.
Program recan?
This results in the time switch checking the stored program and implemen-
ting the correct switching condition.
What does entry correction mean?
In the event of wrong entry during programming, by pressing the CL button,
the entry can be cancelled and immediately corrected.
What does weekday block formation mean?
Simultaneous programming at one switching time e.g. 6
00
ON on several
days of the week e.g. Monday, Tuesday and Friday.
Only one memory lacation is used.
What does channel block formation mean?
Simultaneous programmed switching times, which are effective in several
channels, take up only one memory location.
Advantage: Faster programming of the switching times.
Note: After a time adjustment, only pulses, which are programmed at
least 1 minute after the time adjustment, are carried out.
4. Pulse Program for Time Delayed Switch-OFF
A switch-OFF time e.g. at 8.0 and 10 secs. can be achieved by:
1. Programming a switch-OFF time eg.g. 8
00
(Chapter 7.1)
2. Additional programming of a simultaneous pulse switching time of 10 secs.
duration.
1. Switch-OFF time e.g. 8
00
OFF p
2. Additional pulse ON (o) at 8
00
for
10 secs duration
3. Effective at 8
00
10 secs.
switch OFF.
Note: After time adjustment, only pulses, which are programmed at least 1
minute after the time adjustment are carried out.
5. Channel Block Formation
If not all memory locations are to be used, we recommend you dispense with
channel block formation when programming switching times.
This provides advantages when changing or cancelling individual switching
commands.
