Bedienungsanleitung Thermex Eurostar (Seite 7 von 24) (Englisch)

782626

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

1.4.6 open timing heating"

Turn on state, press “ “can choice open timing heating or not (“ ” icon display

means open timing heating, “ ” icon not display means not open timing heating).

Press” “key for 3S, “come into timing heating setting state, by press “+”and “-” switch

between 24 segments, choice the segment that need heating and press “ “,segment lit

meaning running, not lit meaning no running. Finished the setting, press “Reset” save and

exit.

1.4.4 timing heating setting:

1.4.5 time setting:

2. The backlight

Turn oﬀ boiler ,if no button operation the backlight delay 10S shut down.

Turn on boiler, backlight is lit . If there is no button operation for 10 minutes, the

backlight will be automatically extinguished. Press any key to restore light.

1.4 key operation

1.4.1 Turn ON/OFF

Press” ” 5S , the boiler will switch between ON or OFF; Oﬀ state display “

OF”;when oﬀ state only anti-freezing and pump anti-block function can running.

1.4.2 Temperature setting

On heating mode, press “+” and”-”change the setting temperature, press” ”save and

switch to hot water temperature setting, press “+" and "-" change the setting temperature,

press “Reset” exit and ﬁnish the setting; on hot water mode, press “+" and "-" change the

setting temperature, press “Reset” save and exit.

1.4.3 Winter/Summer mode

turn on state, press” ”can make the boiler switch between winter mode(heating and

hot water function) and summer mode(only hot water function)

On/Oﬀ state, press “ ” 3S come into time setting state, the hour item blinking,

press”+”and “-” change the hour value; after setting hour, press “ “ the min item

blinking, press”+”and “-” change the min value; after setting min, press “ “ the week

item blinking, press”+”and “-” change the week value; ﬁnished setting, press “Reset”

save and exit setting state.

1.4.7parameter setting

No fault state, press “Reset” key 10S, come into parameter menu, by press”+” and “-”

can switch between parameter “tS” and “rE” and “Hi”, at this level menu, press”Reset”

10S, can come into and setting all the parameter.

1.4.7.1Hi parameter

The "Hi" function is to record the last 10 failures of the boiler. when screen display “Hi”,

press” “key, then press “+” and “-” can switch between H01 to H10,H01 is the recent

fault, H10 is the farthest fault, choose one then press “ “ to check the the relative fault.

1.4.7.2rE parameter

when screen display “rE”, press” “key, then press “+” and “-” can switch between “CLr”

and “rE5",when display “CLr” press “ “ 3S can delete all the record of fault, when

display “rE5" press “ “ 3S can reset the default value of the adjustable parameter "P01

~ P07" in the "tS" submenu. press “Reset” to exit.

ﬁgure 2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thermex Eurostar Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info