Bedienungsanleitung Thomas 772 (Seite 10 von 28) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

732497

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

HOW TO CONNECT AN ALTERNATIVE PLUG

If the fitted plug is not suitable for your socket outlet, then it

schould be cut off and disposed of in order to avoid a possible

shock hazard should it be inserted into a 13A socket elsewhere.

A suitable alternative plug of a least 13 Amp rating e.g. 15 Amp

round pin to BS546 should then be fitted to the cable.

The wires in this mains lead are coloured in accordance with the

following code: –

BLUE – “NEUTRAL” (“N”)

BROWN – “LIVE” (“L”)

GREEN AND YELLOW – “EARTH” (“E”)

1. The GREEN AND YELLOW wire must be connected to

the terminal in the plug which is marked with the letter

“E” or by the Earth symbol or coloured green or

green and yellow.

2. The BLUE wire must be connected to the terminal

which is marked with the letter “N” or coloured black.

3. The BROWN wire must be connected to the terminal

which is marked with the letter “L” or coloured red.

ELECTRICAL INFORMATION

WARNING:

THIS APPLIANCE MUST BE EARTHED

The mains lead of this appliance is fitted with a BS1363A 13

amp fused plug. To change a fuse in this type of plug use an

A.S.T.A. approved fuse to BS1362 type.

1. Remove the fuse cover (A) and fuse (B)

2. Fit replacement 13A fuse into fuse cover

3. Refit both into plug

IMPORTANT:

The fuse cover must be refitted when changing a fuse and if the

fuse cover is lost the plug must not be used until a correct repla-

cement is fitted.

Correct replacementes are identified by the colour insert or the

colour embossed in words on the base of the plug.

• Replacement fuse covers are available from your local Elec-

tricity Board Shop.

Congratulations on your new purchase

We recommed that you read these instructions carefully

in order to quickly become familiar with your new

appliance.

A good appliance, which is used properly, will serve

you for many years.

Unpacking the appliance

Dispose of packing materials in accordance with local

regulations.

Check the spin dryer for any transport damages, which

must be reported to the forwarding agent or goods

office responsible within 24 hours. In case of damage,

kindly send all relevant paperwork to the Customer

Service for further treatment.

Preparation for Use

1. Put the operating lever in the “OFF” (0)

position.

YELLOW & GREEN (E)

BROWN (L)

BLUE (N)

cable

clamp

2. Open the lid.

3. Remove the transport safeguard from inside the

spin drum.

4. We recommend that the spin drum be washed

out with a standard detergent before using for

the first time.

5. Place the spin dryer on a level floor at a

distance of about 50 cm away from the

wall or other objects. Never balance out

irregularities in the floor surface by laying wood,

paper or similar materials under the appliance.

Loading the machine

1. Place a sufficiently large container for excess

water under the outlet spout.

2. Plug the appliance in to a mains socket (please

observe the Points of Safety).

Operating Instructions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thomas 772 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info