Bedienungsanleitung Thomas INOX 1420 Plus (Seite 10 von 24) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

485813

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Dry-vacuuming

Important!

The paper filter bag must be fitted when dry-

vacuuming. Plug in the appliance.

The vacuum cleaner is switched on and off by

means of he switch located on the motor block

casing.

Use of tools and accessories

Both suction tubes are inserted into the end of

flexible hose, as required.

Universal brush nozzle

For use on smooth floors (tiles, stone and PVC) and

for vacuuming liquids.

Model INOX 1520 S

Upholstery nozzle

For vacuuming upholstered furniture, car seats, car

boots and smaller uneven surfaces.

Crevice nozzle

For through vacuuming of corners, grooves,

crevices and particularly hard-to-reach places.

Connection for electric tools

model INOX 1520 S

The integrated device socket is designed for

the connection of electric tools with power

consumption 60 – 2000 watt.

The electric tool is plugged into the vacuum

cleaner device socket and the suction hose is

attached to the relevant connecting point of the

electric tool.

After use

Switch off the appliance and pull out the plug.

Wind the mains cable loosely in the hand and

store under the carrying handle.

Change the paper filter bag as required.

Vacuuming liquids

Remove the paper filter bag has before vacuuming

liquids, as it will otherwise disintegrate (see section

„Changing the filter“).

When vacuuming liquids from a container, use

only the flexible hose or suction tubes.

Always ensure that the float is kept clean and in

good condition. It acts as a safety device and

automatically interrupts the flow of air when the

collecting bin is full.

Take care when vacuuming water from high-sided

containers or basins where the quantity Ievel

exceeds the liquid capacity of the collecting bin.

Remember that, in such a case, the water will

continue to flow from the container even if the

collecting bin is full and the float has stopped the

suction flow of the appliance.

Therefore, vacuum only small quantities of water

at a time and empty the collecting bin before

switching on again.

Always lift the suction tube out of the water

before switching off the motor. Pull out the plug.

WARNING! If petrol, paint thinner, fuel

oil etc. are mixed to mix with suction air

flow, explosive fumes or compounds may

be formed.

Acetones, acids and solvents may attack the

materials on your appliance.

It is quite safe to vacuum water which contains

ordinary household cleaning agents.

After vacuuming liquids, the collecting bin and all

accessories used should be wiped clean and left to

dry (see section “Care and maintenance”).

Changing the filter

Pull out the plug!

Remove the motor block from the collecting bin.

Hold the paper filter bag by the cardboard inlay

and pull off from the suction socket.

Place the new paper filter bag inside the collecting

bin, making sure that the opening located in the

cardboard inlay is placed in line with the suction

socket. Then press the filter bag evenly around the

sides of the collecting bin.

Place the motor block on the collecting bin again

and secure by means of both snap fasteners.

Care and maintenance

Always pulI out the plug before cleaning the

appliance! Never immerse the motor block in

water!

Clean the motor block casing and collecting bin

with a moist cloth and wipe dry.

If there is a reduction in suction power, change the

paper filter bag.

If necessary, the collecting bin can be washed out

with water. Ensure that the bin is completely dry

before using again.

Rinse out collecting bin and alI accessories used

with warm, soapy water after wet-vacuuming

(particularly sticky liquids).

Do not use abrasive cleaning agents!

Caution!

Replacing the Connecting Cable.

This unit is equipped with a special connection

cable which must only be replaced by an

authorized workshop or customer service center.

Operation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thomas INOX 1420 Plus Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info