Bedienungsanleitung Thomson 40FU3255 (Seite 11 von 15) (Englisch)

559108

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

English

EN 11

Using more of your TV

- If you select Off, this turns off the audio output

from the audio device connected to the SPDIF

output.

Note: The options you may choose depend on

the programme you are watching. If you

select PCM and the sound is ahead of the

picture, you can select SPDIF delay from

the Options menu and press ◄/► to adjust

the delay time to synchronize the sound with

the picture.

T-Link

Use this function to search for CEC devices connected

to the HDMI sockets in your TV and enable one-touch

play and one-touch standby between CEC devices.

Enabling or disabling T-Link

1. Press Menu on the remote control, then select

Options > T-Link.

2. Press ◄/► to select On or Off, if this function

is turned on, T-Link option will be available in

the Quick access menu which you can enter by

pressing the Option button on the remote control.

Using one-touch play

With one-touch play, pressing the play button on (for

example) your DVD remote control starts playback on

your DVD device and automatically switches your TV

to the correct source, displaying DVD content.

Using system standby

With system standby, pressing the

button on (for

example) your TV remote control switches your TV

and all connected HDMI devices to standby mode.

Note: Guide Menu will be available in the sublist

of T-Link option when T-Link function is

turned on and CEC devices are connected.

With this function, you can operate CEC

devices with a virtual on-screen controller

and the TV remote control.

Note: The CEC functions depend on the devices

connected and it is possible that some

devices may not interoperate correctly when

connected to this TV. The user manual or

the manufacturer of the problematic devices

should be consulted for further information.

Common interface

Encrypted digital TV channels can be decoded with a

common interface module and a card provided by a

digital TV service operator.

The common interface module may enable several

digital services, depending on the operator and

services you choose (for example, pay TV). Contact

your digital TV service operator for more information

about services and terms.

Using the common interface module

WARNING: Switch off your TV before inserting a

common interface module. Be sure to follow the

instructions described below. Wrong insertion of

a common interface module may damage both the

module and your TV.

1. Following the directions printed on the common

interface module, gently insert the module into the

common interface slot on the TV.

2. Push the module in as far as it will go.

3. Turn on the TV and wait for the common interface

function to be activated. This may take several

minutes.

Note: Do not remove the common interface

module from the slot. Removing the module

will deactivate the digital services.

Accessing common interface services

After inserting and activating the common interface

module, press Menu on the remote control and select

Options > Common interface.

This menu option is only available if the common

interface module is correctly inserted and activated.

On-screen applications and content are provided by

your digital TV service operator.

Software update

Press Menu on the remote control and select

Options > Software update. Press OK/► to enter.

(Refer to Figure 5.)

- Current version: Displays the current version of

the software.

- Product name: Displays the product name of your

set.

- Serial number (if available): Displays the serial

number of your set.

- OAD (Over Air Download): Enables you to install the

latest version of the software if available from the

broadcast. Select OAD and press OK/► to enter.

• Use ◄/► to select Yes under Auto download

to automatically download the latest software if

available. After the software has been downloaded

successfully, you will be prompted to decide if you

want to install it right now. If yes, follow the on-

screen instructions to complete your installation.

You can also select to ignore the installation here.

• Select No under Auto download to decline the

automatic download.

• Select Manual OAD download and press OK/►

if you wish to search manually for the latest

software. Follow the on-screen instructions to

complete. During the search, press OK/Exit if you

wish to cancel or exit the process.

Changing to Shop or Home mode

1. Press Menu on the remote control and select

Options > Location.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thomson 40FU3255 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Thomson 40FU3255

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info