- 4 -
For phone models TH-103DBK and TH-103DWE:
Adapter for the telephone base: 5E-AD060050-E
Input: 100-240V~ 50/60Hz 150mA
Output: DC 6V 500mA
For phone models TH-103D2BK and TH-103D2WE:
Adapter for the telephone base: 5E-AD070042-E
Input: 100-240V~ 50/60Hz 150mA
Output: DC 7V 420mA
Installing the telephone base
The telephone base should be placed at least 1 meter away from other electrical appliances in
order to avoid interference. The handset exchanges radio signals with the telephone base. The
strength of these signals depends on the position of the base. You can obtain a stronger signal
by placing the base higher.
Operating range of the handset
The operating range of your telephone is 300 meters outdoors without obstructions between
the telephone base and handset. Obstructions reduce the operating range. When the
telephone base is located indoors, while the handset is indoors or outdoors, the operating
range is reduced to 50 meters. Thick concrete walls reduce the operating range significantly.
Signal strength
When the handset is within the operating range of the telephone base, appears on the screen.
If the handset is out of range of range, [SEARCHING] appears on the display and the symbol
flashes on the display. Get closer to the telephone base to turn off this indicator.
Installing and charging the battery
1. Insert the plug of the supplied adapter to the bottom of the telephone base and the other
end into an electrical outlet.
2. Plug the telephone line cord to the bottom of the telephone base and the other end into a
telephone wall jack.
3. Insert the rechargeable Ni-MH batteries supplied into the handset by following the correct
polarity as indicated. Close the battery compartment.
4. Place the handset on the telephone base and let the batteries charge for 24 hours before
using it for the first time.