- 14 -
Base settings
Removing a Handset
You can remove a handset from a base to allow another handset to be registered.
(1) Press the <MENU> button.
(2) Use the <▲> or <▼> button to scroll to [BS SETTINGS] and press <OK>.
(3) Use the <▲> or <▼> button to scroll to [DELETE HS] and press <OK>.
(4) Enter the PIN code (0000) and press <OK>.
(5) Use the <▲> or <▼> button to scroll to the handset number (1 to 5) you want to remove and
press <OK>.
Note: You can only cancel subscription of another handset, not the handset you are using to do
the remove procedure.
The Dialing Mode
There are two types of dialing mode: Tone and Pulse dialing.
(1) Press the <MENU> button.
(2) Use the <▲> or <▼> button to scroll to [BS SETTINGS] and press <OK>.
(3) Use the <▲> or <▼> button to scroll to [DIAL MODE] and press <OK>.
(4) Use the <▲> or <▼> button to select [TONE] or [PULSE] and press <OK>.
Flash Time (Recall)
When you press the <R> button during conversation, also called flash or recall, the unit
generates a line interruption. It gives you the possibility to use the special services of your
telephone provider and/or to transfer calls when you have a telephone exchange.
Setting the Flash Time:
(1) Press the <MENU> button.
(2) Use the <▲> or <▼> button to scroll to [BS SETTINGS] and press <OK>.
(3) Use the <▲> or <▼> button to scroll to [FLASH TIME] and press <OK>.
(4) Use the <▲> or <▼> button to select two values of flash time durations. The unit of flash time
value is msec.
(5) Press <OK> to confirm.
Modifying the PIN Code (System PIN Code)
The 4-digit PIN code is required for changing the settings of the telephone base and for
registering/de-registering a handset. The default PIN code is “0000”.
(1) Press <MENU> button.
(2) Use the <UP> or <DOWN> button to scroll to [BS SETTINGS] and press <OK>.
(3) Use the <UP> or <DOWN> button to scroll to [MODIFY PIN] and press <OK>.
(4) Enter the old PIN and press <OK>.
(5) Enter the new PIN and press <OK>.
(6) Press the new PIN again and press <OK>. If it is successful, you would hear a long beep.
NOTE:
If the wrong PIN code is entered, it will give error beep indication and ask for input the PIN
numbers again.
