Bedienungsanleitung Thomson MIC100 (Seite 12 von 36) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

627608

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

10EN

MICRO SYSTEM

MIC100

USING

POWER SUPPLY

Speaker connection

• Unfurl the load speaker wires and connect them to the

corresponding terminals.

Red Black

USING THE APPLIANCE

• Press once q of the device or twice q on the remote to

turn the appliance on: the indicator light (C) turns off.

• Press q button to turn the appliance to stand-by mode:

the indicator light (C) turns on.

COMMENTS CONCERNING TACTILE KEYS

Tactile keys react to touch under normal conditions. They

do not react to greasy or wet ngers. Always clean and dry

the surface with a soft cloth. Do not use a damp cloth or an

aggressive detergent.

USING THE RADIO

• Turn the appliance on and press SOURCE to select the

« FM » function.

• Tune the radio to the desired station using keys {

and }: the frequency is displayed on the LED screen.

• Press and hold the key } to scroll through frequencies,

then release to trigger automatically on the nearest

station received.

• To turn the radio off, press the q button.

Note : For improved reception, unfurl the FM wire aerial (H)

located at the rear of the appliance.

PROGRAMMING RADIO STATIONS

Manual programming:

• Select a station to be saved.

• Press PROG/MEM of the device or MEMORY on the

remote: program mode (P- 01) is displayed.

• Press w and s keys top select a number.

• Press PROG/MEM of the device or MEMORY on the

remote, to save each station (20 maximum).

Automatic programming:

Press PROG/MEM of the device or MEMORY on the remote

for 3 seconds: programming will launch automatically and

memorize received stations.

Accessing saved stations:

• Press keys CH+ and CH- to access the saved stations.

USING THE CD PLAYER

Comment: Before rst use, remove the protective cardboard

insert on the lens located in the CD compartment (B).

Move the compartment door with care.

Playing a CD:

• Press the CD compartment door and insert a CD

(printed side up).

• Close the CD compartment by hand.

• Turn the appliance on by pressing q button and press

SOURCE to select “CD” mode.

• Adjust the volume using the keys and .

REPEAT MODE

Press REPEAT several times.

• NORMAL: stops repeat.

• REPEAT ONE: repeats one track.

• REPEAT ALL: repeats all tracks.

• REPEAT FLD: repeat all albums (only MP3 les).

• RANDOM: playback random.

TIME SETTING

In Off mode:

• Press PROG/MEM of the device or on the remote.

• Press keys s and w to switch between 12 or 24-hour

display.

• Press on the PROG/MEM of the device or on the

remote: the display ashes.

• Set the time using the keys s and w. PROG/MEM of

the device or on the remote to conrm.

• Repeat the previous operation to set the minutes.

NORMAL

REP ONE

REP ALL

RANDOM

NORMAL

REP ONE REP ALL RANDOM REP FLD

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thomson MIC100 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Thomson MIC100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info