Bedienungsanleitung Thomson MIC200IBT (Seite 20 von 86) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

699787

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

- EN 7 -

alarm 1 and press the MENU/INFO button to conrm.

7. Use the NEXT/PREV button to scroll to the sound source for the alarm 1. You can choose from

Buzzer, FM, CD or USB. Press the MENU/INFO button to conrm.

8. Use the NEXT/PREV button to set the hour for the alarm 2 and press the MENU/INFO button to

conrm.

9. The minute of alarm 2 will now ash. Use the NEXT/PREV button to scroll to the minutes for the

alarm 2 and press the MENU/INFO button to conrm.

10. Use the NEXT/PREV button to scroll to the sound source for the alarm 2. You can choose from

Buzzer, FM, CD or USB. Press the MENU/INFO button to conrm.

Note: Press the MENU/INFO button repeatedly to turn on/off the alarm 1 and alarm 2 function.

‘AL’ symbol in the top of the display, together with the digit ‘1’ or ‘2’ as appropriate, will conrm when

an alarm has been set.

AL 1------Alarm 1 ON

AL 2------Alarm 2 ON

AL 1 + AL 2 ----Alarm 1 & Alarm 2 are both ON

Stopping the Alarm

When the alarm sounds, press and release the POWER/MODE button.

Alternatively, you can press and release the ‘SLEEP/SNOOZE’ button on the remote control (see

Snooze function below).

Note: If you press the POWER/MODE button to stop the alarm, the alarm symbol will remain on the

display and the alarm will sound again at the same time the next day.

Snooze

When the alarm sounds, you can press and release the ‘SLEEP/SNOOZE’ button on the remote

control. ‘Snooze’ will be displayed, followed by the snooze time countdown, until the alarm sounds

again about 9 minutes later.

Turning off the Alarm

In standby mode, press the MENU/INFO button repeatedly until the AL 1 or AL 2 indicator disappears.

Sleep Timer

You can set your radio to turn off automatically using the sleep timer. You can choose from Sleep off,

10, 20, 30, 40, 50, 60, 70, 80 and 90 minutes.

With your unit switched on (not in Standby mode):

Press the SLEEP/SNOOZE button on the remote control to cycle through the various sleep time

options, such as Sleep off, 10, 20, 30, 40, 50, 60, 70, 80 and 90 minutes.

Note: To cancel the sleep timer, follow the steps for setting the sleep time but stop when ‘Sleep ’ disappears.

Playing a compact disc (CD)

NOTE: Never touch the laser lens inside the CD compartment. Clean the laser lens using a CD cleaner

disc if it becomes dirty.

1. Press the POWER/MODE button to turn on the unit.

2. Press the POWER/MODE button repeatedly to select the CD function.

3. Press the EJECT/+10 button to open the CD door and insert a CD into the tray with the printed

label side facing up.

4. Press the EJECT/+10 button again to close the CD DOOR and the disc will rotate for a few

seconds, then automatically play the 1

track.

5. To temporarily pause playback, press the PLAY/PAUSE/SCAN button. To resume, press it again.

6. Press the STOP/SELECT button to stop playback.

Reverse/Forward

1. The

and buttons can be used to jump to a different track number or to scan disc tracks

at high speed.

2. Press the

button once to hear the beginning of the current track. Press it two or more times to

hear previous tracks on the disc.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thomson MIC200IBT Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info