Bedienungsanleitung Thomson MIC500IWF (Seite 26 von 140) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

687734

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

- EN 6 -

5. INSTALLATION

Please remove the parts carefully from the packaging. Check whether all parts are present.

Note: the radio can be controlled both using the keys on the radio as well as via the remote control.

Operation via the remote control is a more convenient and an easier method of playing the MIC500IWF.

For this reason, this operating manual will focus on setting up and operating the radio via the remote

control supplied.

If the radio is connected to a network, it can also be controlled via the application AirMusic Control App.

This application is available for Android and IOS operating systems. For more details, see Chapter 8.

5.1. Power supply

First, connect the mains adapter supplied with the corresponding socket on the rear panel of the

MIC500IWF. Next, connect the mains adapter to a 230V outlet. Finally, fully extend the telescopic

antenna on the rear panel of the radio. This will ensure the best possible reception, should you wish to

receive terrestrially broadcast stations via the antenna.

5.2. Network connection

To use the radio’s Internet functions, it must be connected to a network. You can establish the

connection via a cable (LAN) or via the integrated W-LAN receiver. If you are using a LAN cable,

connect it to the LAN socket.

5.3. Language selection

Switch on using the power switch at the rear panel of the radio. The radio will be switched on.

Use the Up/Down keys of the remote control to select the menu language. Conrm the menu language

choice by pressing the ENTER key on the remote control.

5.4. Checking the network

If you wish to connect the radio via your home network, conrm the question displayed by pressing

ENTER. When this setting is selected, the radio will scan for available networks each time it is switched

on.

5.5. Network conguration

To connect your radio to the network, conrm the question dis- played by pressing ENTER. If you do

not wish to connect the radio to a network, you can bypass this menu item by selecting “No”.

5.5.1. Network selection

Select the type of connection to be used to connect the radio to a network. If you have connected a

LAN cable, select “Cable Network”, and if you wish to establish a Wi-Fi connection (W-LAN) select

“Wireless Network”.

When selecting a connection via W-LAN (wireless network), all available networks will be displayed.

Select the desired network to which the connection is to be established

Enter the W-LAN key. Use the keys to select a symbol, continue by pressing the key.

Conrm the entry by pressing “ENTER”.

6. OPERATION

Press the “Menu” key on the radio or on the remote control to go to the radio’s main menu. The

radio will automatically close the menu after 10 seconds and will revert to the radio mode previously

selected. A display in the bottom right-hand corner will display a reverse countdown of the seconds.

You can navigate the menu using the keys.

The radio’s main menu consists of the following menu items:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thomson MIC500IWF Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info