Bedienungsanleitung Thomson Mica - TH-020DRWE (Seite 45 von 52) (Englisch, Französisch)

655279

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Advanced settings

Change system PIN

The system PIN is required for handset registration and de-registration, and for accessing the answering machine

remotely. The default Master PIN code is 0000.

1. Press MENU button. Scroll ▲ or ▼ button to select ADVANCED SET.

2. Press OK button. Scroll ▲ or ▼ button to select CHANGE PIN.

3. Press OK button. The display shows PIN----. Enter the current PIN code by keypad.

4. Press OK button to confirm. The display shows NEW----. Enter the new PIN code and press OK to confirm.

Registration

Registration is the process to link a new handset to the base. A maximum of 4 handsets can be associated with

the base. This base is compatible with Thomson’s handset and other GAP-compatible handsets.

Handset batteries must be fully charged and you must be closed to the base to register.

Handset that supplied inside this package is already registered.

1. At the base: Press and hold the PAGE button for 5~6 seconds.

2. At the handset:

a. Press MENU button. Scroll ▲ or ▼ button to select ADVANCED SET

b. Press OK button. Scroll ▲ or ▼ button to select REGISTRATION.

c. Press OK button, the display shows PIN----. Enter the 4 digit PIN code (default 0000) for the base.

d. Press OK button to confirm. The display shows WAITING.

3. After few seconds, there will a confirmation sound from the handset. The handset and base have registered

successfully. It will automatically assign a number which is displayed on the handset and must be used for

internal calls.

Notes:

1) If the PIN code is incorrect, the handset returns to standby after 2 minutes. Try registering again.

2) If no base is found in 2 minutes, an error tone to indicate failed registration and the handset returns to

standby mode. Try registering again.

De-registration

1. Press MENU button. Scroll ▲ or ▼ button to select ADVANCED SET.

2. Press OK button. Scroll ▲ or ▼ button to select UNREGISTER.

3. Press OK button. The display shows PIN----. Enter the 4 digit PIN code (default 0000).

4. Press OK button. Scroll ▲ or ▼ button to select the handset you want to de-register.

5. Press OK button to confirm.

Restore factory default

1. Press MENU button. Scroll ▲ or ▼ button to select ADVANCED SET.

2. Press OK button. Scroll ▲ or ▼ button to select RESET.

3. Press OK button. The display shows CONFIRM?

4. Press OK button. All the settings would be restored to factory default (the phonebook memory and answering

machine messages will not be removed).

Set prefix number

Note: This option is not applied for France.

This allows you to define a prefix number (PREDIX NB.) being added to the beginning of any pre-dialed number,

and to define a detect string (DETECT DIGIT) to prevent the prefix number being added unless the detect string

matches the first digits of the pre-dialed number, in which case the prefix number will replace the detect string

digits. If no detect string number is entered, the prefix number will be automatically added to the pre-dial

number after the Talk button is pressed.

You can enter up to 5 digits for the detect string and up to 10 digits for the auto prefix number.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thomson Mica - TH-020DRWE Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info